> -----Original Message----- > From: Wolfram Sang [mailto:wsa@xxxxxxxxxxxxx] > Sent: 21 August 2017 09:29 > To: Biju Das <biju.das@xxxxxxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland > <mark.rutland@xxxxxxx>; Simon Horman <horms@xxxxxxxxxxxx>; Magnus > Damm <magnus.damm@xxxxxxxxx>; Chris Paterson > <Chris.Paterson2@xxxxxxxxxxx>; Wolfram Sang <wsa+renesas@sang- > engineering.com>; devicetree@xxxxxxxxxxxxxxx; linux-renesas- > soc@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Subject: Re: [PATCH 2/3] ARM: dts: iwg20m: Enable SDHI0 controller > > > + > > +&sdhi0 { > > +pinctrl-0 = <&sdhi0_pins>; > > +pinctrl-names = "default"; > > + > > +vmmc-supply = <®_3p3v>; > > +vqmmc-supply = <®_3p3v>; > > +cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; > > +status = "okay"; > > +}; > > Just to make sure: No 1.8V and UHS support (SDR50/104)? Or is this to be > tested and added later? Thanks. The current hardware doesn't support 1.8V switching for SDHI0. There is a plan to add this in future board varient, at that time we will add UHS support. Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
