On 08/10/2017 02:26 PM, Hans Verkuil wrote:
On 10/08/17 10:49, Archit Taneja wrote:
Hi Hans,
On 07/30/2017 06:37 PM, Hans Verkuil wrote:
From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
This patch series adds CEC support to the drm adv7511/adv7533 drivers.
I have tested this with the Qualcomm Dragonboard C410 (adv7533 based)
and the Renesas R-Car Koelsch board (adv7511 based).
Note: the Dragonboard needs this patch:
https://patchwork.kernel.org/patch/9824773/
Archit, can you confirm that this patch will go to kernel 4.14?
And the Koelsch board needs this 4.13 fix:
https://patchwork.kernel.org/patch/9836865/
I only have the Koelsch board to test with, but it looks like other
R-Car boards use the same adv7511. It would be nice if someone can
add CEC support to the other R-Car boards as well. The main thing
to check is if they all use the same 12 MHz fixed CEC clock source.
Anyone who wants to test this will need the CEC utilities that
are part of the v4l-utils git repository:
git clone git://linuxtv.org/v4l-utils.git
cd v4l-utils
./bootstrap.sh
./configure
make
sudo make install
Now configure the CEC adapter as a Playback device:
cec-ctl --playback
Discover other CEC devices:
cec-ctl -S
I tried the instructions, and I get the following output. I don't think I have
any CEC device connected, though. Is this the expected behaviour?
#cec-ctl -S
Driver Info:
Driver Name : adv7511
Adapter Name : 3-0039
Capabilities : 0x0000000e
Logical Addresses
Transmit
Passthrough
Driver version : 4.13.0
Available Logical Addresses: 3
Physical Address : 1.0.0.0
Logical Address Mask : 0x0000
CEC Version : 2.0
Logical Addresses : 0
#cec-ctl --playback
[ 1038.761545] cec-3-0039: cec_thread_func: message 44 timed out!
This isn't right. You shouldn't see this. It never receives an interrupt
when the transmit has finished, which causes these time outs.
What are you testing this on? The Dragonboard c410?
Yes.
Can you check the cec clock frequency? It should be 19.2 MHz.
Remember to apply this patch: https://patchwork.kernel.org/patch/9824773/
You probably did, but just in case...
clk_summary does show bb_clk2 to be set to 19.2 Mhz.
I applied a newer version of this patch, which got merged in clk-next:
https://patchwork.kernel.org/patch/9845493/
I will try to apply the patch you use and check again.
Thanks,
Archit
Regards,
Hans
Driver Info:
Driver Name : adv7511
Adapter Name : 3-0039
Capabilities : 0x0000000e
Logical Addresses
Transmit
Passthrough
Driver version : 4.13.0
Available Logical Addresses: 3
Physical Address : 1.0.0.0
Logical Address Mask : 0x0010
CEC Version : 2.0
Vendor ID : 0x000c03
Logical Addresses : 1 (Allow RC Passthrough)
Logical Address : 4
Primary Device Type : Playback
Logical Address Type : Playback
All Device Types : Playback
RC TV Profile : None
Device Features :
None
[ 1041.063605] cec-3-0039: cec_thread_func: message 4f a6 06 10 00 00 timed out!
[ 1043.367482] cec-3-0039: cec_thread_func: message 4f 84 10 00 04 timed out!
Thanks,
Archit
Regards,
Hans
Hans Verkuil (4):
dt-bindings: adi,adv7511.txt: document cec clock
arm: dts: qcom: add cec clock for apq8016 board
arm: dts: renesas: add cec clock for Koelsch board
drm: adv7511/33: add HDMI CEC support
.../bindings/display/bridge/adi,adv7511.txt | 4 +
arch/arm/boot/dts/r8a7791-koelsch.dts | 8 +
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +
drivers/gpu/drm/bridge/adv7511/Kconfig | 8 +
drivers/gpu/drm/bridge/adv7511/Makefile | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 45 ++-
drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 314 +++++++++++++++++++++
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 152 +++++++++-
drivers/gpu/drm/bridge/adv7511/adv7533.c | 30 +-
9 files changed, 514 insertions(+), 50 deletions(-)
create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
