From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
ADG is registering fixed rate clock for audio_clkout, but it had not
been unregister clock when removing.
Salvator-X board is using ak4613 driver now, and it supports
hw_constraints from commit 907cd8809eebc ("ASoC: ak4613: add
hw_constraint rule for Sampling Rate").
And this calculation is using input clk. This ak4613 input clock is
ADG clkout on Salvator-X.
Because ADG had not been unregister clkout when unbinding, it receives
fixed rate clk register error when re-binding.
Thus, ak4613 can't get correct input clock, and hw_constraints will be
failed after re-binding.
This means Salvator-X board can't use sound after unbind/bind.
This patch solves this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
> Mark
This patch is for v4.13-rcX
sound/soc/sh/rcar/adg.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c
index 197cb3e..5b5389e 100644
--- a/sound/soc/sh/rcar/adg.c
+++ b/sound/soc/sh/rcar/adg.c
@@ -610,6 +610,13 @@ void rsnd_adg_remove(struct rsnd_priv *priv)
{
struct device *dev = rsnd_priv_to_dev(priv);
struct device_node *np = dev->of_node;
+ struct rsnd_adg *adg = priv->adg;
+ struct clk *clk;
+ int i;
+
+ for_each_rsnd_clkout(clk, adg, i)
+ if (adg->clkout[i])
+ clk_unregister_fixed_rate(adg->clkout[i]);
of_clk_del_provider(np);
--
1.9.1
