From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Add pin configuration subnode for RIIC2 interface.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r7s72100-genmai.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 12306ff18353..0766661d4206 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -43,6 +43,11 @@
/* P3_0 as TxD2; P3_2 as RxD2 */
pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
};
+
+ i2c2_pins: i2c2 {
+ /* RIIC2: P1_4 as SCL, P1_5 as SDA */
+ pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+ };
};
&extal_clk {
@@ -65,6 +70,9 @@
status = "okay";
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
eeprom@50 {
compatible = "renesas,24c128", "atmel,24c128";
reg = <0x50>;
--
2.1.4
