From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
When using the new CPG/MSSR bindings, there is no longer a
"renesas,rcar-gen2-cpg-clocks" node, and the code to obtain the external
clock crystal frequency falls back to a default of 20 MHz.
While this is correct for all upstream R-Car Gen2 and RZ/G1 boards, this
is not necessarily the case for out-of-tree third party boards.
Add support for finding the external clock crystal oscillator on RZ/G1M,
and on R-Car H2, M2-W, and M2-N using the new CPG/MSSR bindings, through
the corresponding "renesas,r8a77xx-cpg-mssr" nodes.
Note that this is not needed on R-Car V2H and E2, and on RZ/G1E, as on
those SoCs the arch_timer and generic counter clock is derived from the
ZS clock instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/mach-shmobile/setup-rcar-gen2.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index a6e74f481dea..3bd505da3172 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -29,17 +29,29 @@
#include "common.h"
#include "rcar-gen2.h"
+static const struct of_device_id cpg_matches[] __initconst = {
+ { .compatible = "renesas,rcar-gen2-cpg-clocks", },
+ { .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" },
+ { .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" },
+ { .compatible = "renesas,r8a7791-cpg-mssr", .data = "extal" },
+ { .compatible = "renesas,r8a7793-cpg-mssr", .data = "extal" },
+ { /* sentinel */ }
+};
+
static unsigned int __init get_extal_freq(void)
{
+ const struct of_device_id *match;
struct device_node *cpg, *extal;
u32 freq = 20000000;
+ int idx = 0;
- cpg = of_find_compatible_node(NULL, NULL,
- "renesas,rcar-gen2-cpg-clocks");
+ cpg = of_find_matching_node_and_match(NULL, cpg_matches, &match);
if (!cpg)
return freq;
- extal = of_parse_phandle(cpg, "clocks", 0);
+ if (match->data)
+ idx = of_property_match_string(cpg, "clock-names", match->data);
+ extal = of_parse_phandle(cpg, "clocks", idx);
of_node_put(cpg);
if (!extal)
return freq;
--
2.1.4
