This patch adds support for R-Car M3-W. This patch also adds R-Car
Gen3 generic version's compatible.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/renesas_usb3.txt | 16 +++++++++++++---
drivers/usb/gadget/udc/renesas_usb3.c | 8 ++++++++
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 8d52766..e280258 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -3,20 +3,30 @@ Renesas Electronics USB3.0 Peripheral driver
Required properties:
- compatible: Must contain one of the following:
- "renesas,r8a7795-usb3-peri"
+ - "renesas,r8a7796-usb3-peri"
+ - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
+ device
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: Base address and length of the register for the USB3.0 Peripheral
- interrupts: Interrupt specifier for the USB3.0 Peripheral
- clocks: clock phandle and specifier pair
-Example:
+Example of R-Car H3 ES1.x:
usb3_peri0: usb@ee020000 {
- compatible = "renesas,r8a7795-usb3-peri";
+ compatible = "renesas,r8a7795-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
reg = <0 0xee020000 0 0x400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
};
usb3_peri1: usb@ee060000 {
- compatible = "renesas,r8a7795-usb3-peri";
+ compatible = "renesas,r8a7795-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
reg = <0 0xee060000 0 0x400>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index aa2b185..45410f3 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2506,6 +2506,14 @@ static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev,
.compatible = "renesas,r8a7795-usb3-peri",
.data = &renesas_usb3_priv_gen3,
},
+ {
+ .compatible = "renesas,r8a7796-usb3-peri",
+ .data = &renesas_usb3_priv_gen3,
+ },
+ {
+ .compatible = "renesas,rcar-gen3-usb3-peri",
+ .data = &renesas_usb3_priv_gen3,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, usb3_of_match);
--
1.9.1
