Add pin configuration for LED0 which is connected to a GPIO.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index f8285b951140..5dcaaf131d27 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -10,6 +10,7 @@
/dts-v1/;
#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
@@ -34,6 +35,15 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ leds {
+ status = "okay";
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&port7 1 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&extal_clk {
--
2.13.0
