Add pin configuration for SDHI ch1.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index cedf887e809a..f8285b951140 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -78,6 +78,18 @@
<RZA1_PINMUX(2, 10, 2)>, /* ET_RXD2 */
<RZA1_PINMUX(2, 11, 2)>; /* ET_RXD3 */
};
+
+ /* SDHI ch1 on CN1 */
+ sdhi1_pins: sdhi1 {
+ pinmux = <RZA1_PINMUX(3, 8, 7)>, /* SD_CD_1 */
+ <RZA1_PINMUX(3, 9, 7)>, /* SD_WP_1 */
+ <RZA1_PINMUX(3, 10, 7)>, /* SD_D1_1 */
+ <RZA1_PINMUX(3, 11, 7)>, /* SD_D0_1 */
+ <RZA1_PINMUX(3, 12, 7)>, /* SD_CLK_1 */
+ <RZA1_PINMUX(3, 13, 7)>, /* SD_CMD_1 */
+ <RZA1_PINMUX(3, 14, 7)>, /* SD_D3_1 */
+ <RZA1_PINMUX(3, 15, 7)>; /* SD_D2_1 */
+ };
};
&mtu2 {
@@ -96,6 +108,8 @@
};
&sdhi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi1_pins>;
bus-width = <4>;
status = "okay";
};
--
2.13.0
