To avoid mixing comment styles when new comments complying with the
kernel coding style are introduced, fix all multiline comments in one
go.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 24 ++++++++++++------
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 21 ++++++++++------
drivers/gpu/drm/rcar-du/rcar_du_group.c | 18 ++++++++-----
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 18 ++++++++-----
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 12 ++++++---
drivers/gpu/drm/rcar-du/rcar_du_plane.c | 42 ++++++++++++++++++++-----------
drivers/gpu/drm/rcar-du/rcar_du_plane.h | 3 ++-
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 6 +++--
8 files changed, 96 insertions(+), 48 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index f131fc68cc46..a04802f7b2f1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -168,7 +168,8 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
u32 escr;
u32 div;
- /* Compute the clock divisor and select the internal or external dot
+ /*
+ * Compute the clock divisor and select the internal or external dot
* clock based on the requested frequency.
*/
clk = clk_get_rate(rcrtc->clock);
@@ -261,12 +262,14 @@ void rcar_du_crtc_route_output(struct drm_crtc *crtc,
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
struct rcar_du_device *rcdu = rcrtc->group->dev;
- /* Store the route from the CRTC output to the DU output. The DU will be
+ /*
+ * Store the route from the CRTC output to the DU output. The DU will be
* configured when starting the CRTC.
*/
rcrtc->outputs |= BIT(output);
- /* Store RGB routing to DPAD0, the hardware will be configured when
+ /*
+ * Store RGB routing to DPAD0, the hardware will be configured when
* starting the CRTC.
*/
if (output == RCAR_DU_OUTPUT_DPAD0)
@@ -342,7 +345,8 @@ static void rcar_du_crtc_update_planes(struct rcar_du_crtc *rcrtc)
}
}
- /* Update the planes to display timing and dot clock generator
+ /*
+ * Update the planes to display timing and dot clock generator
* associations.
*
* Updating the DPTSR register requires restarting the CRTC group,
@@ -450,7 +454,8 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
/* Start with all planes disabled. */
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
- /* Select master sync mode. This enables display operation in master
+ /*
+ * Select master sync mode. This enables display operation in master
* sync mode (with the HSYNC and VSYNC signals configured as outputs and
* actively driven).
*/
@@ -478,7 +483,8 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
if (!rcrtc->started)
return;
- /* Disable all planes and wait for the change to take effect. This is
+ /*
+ * Disable all planes and wait for the change to take effect. This is
* required as the DSnPR registers are updated on vblank, and no vblank
* will occur once the CRTC is stopped. Disabling planes when starting
* the CRTC thus wouldn't be enough as it would start scanning out
@@ -491,7 +497,8 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
drm_crtc_wait_one_vblank(crtc);
- /* Disable vertical blanking interrupt reporting. We first need to wait
+ /*
+ * Disable vertical blanking interrupt reporting. We first need to wait
* for page flip completion before stopping the CRTC as userspace
* expects page flips to eventually complete.
*/
@@ -502,7 +509,8 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
rcar_du_vsp_disable(rcrtc);
- /* Select switch sync mode. This stops display operation and configures
+ /*
+ * Select switch sync mode. This stops display operation and configures
* the HSYNC and VSYNC signals as inputs.
*/
rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH);
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index d6a0255181cc..b95437bccb3d 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -39,7 +39,8 @@ static const struct rcar_du_device_info rcar_du_r8a7779_info = {
.features = 0,
.num_crtcs = 2,
.routes = {
- /* R8A7779 has two RGB outputs and one (currently unsupported)
+ /*
+ * R8A7779 has two RGB outputs and one (currently unsupported)
* TCON output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
@@ -61,7 +62,8 @@ static const struct rcar_du_device_info rcar_du_r8a7790_info = {
.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
.num_crtcs = 3,
.routes = {
- /* R8A7790 has one RGB output, two LVDS outputs and one
+ /*
+ * R8A7790 has one RGB output, two LVDS outputs and one
* (currently unsupported) TCON output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
@@ -87,7 +89,8 @@ static const struct rcar_du_device_info rcar_du_r8a7791_info = {
| RCAR_DU_FEATURE_EXT_CTRL_REGS,
.num_crtcs = 2,
.routes = {
- /* R8A779[13] has one RGB output, one LVDS output and one
+ /*
+ * R8A779[13] has one RGB output, one LVDS output and one
* (currently unsupported) TCON output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
@@ -127,7 +130,8 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {
| RCAR_DU_FEATURE_EXT_CTRL_REGS,
.num_crtcs = 2,
.routes = {
- /* R8A7794 has two RGB outputs and one (currently unsupported)
+ /*
+ * R8A7794 has two RGB outputs and one (currently unsupported)
* TCON output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
@@ -149,7 +153,8 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = {
| RCAR_DU_FEATURE_VSP1_SOURCE,
.num_crtcs = 4,
.routes = {
- /* R8A7795 has one RGB output, two HDMI outputs and one
+ /*
+ * R8A7795 has one RGB output, two HDMI outputs and one
* LVDS output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
@@ -180,7 +185,8 @@ static const struct rcar_du_device_info rcar_du_r8a7796_info = {
| RCAR_DU_FEATURE_VSP1_SOURCE,
.num_crtcs = 3,
.routes = {
- /* R8A7796 has one RGB output, one LVDS output and one
+ /*
+ * R8A7796 has one RGB output, one LVDS output and one
* (currently unsupported) HDMI output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
@@ -341,7 +347,8 @@ static int rcar_du_probe(struct platform_device *pdev)
ddev->irq_enabled = 1;
- /* Register the DRM device with the core and the connectors with
+ /*
+ * Register the DRM device with the core and the connectors with
* sysfs.
*/
ret = drm_dev_register(ddev, 0);
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
index 64738fca96d0..a3e29bb420fd 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -64,7 +64,8 @@ static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
if (rcdu->info->gen < 3) {
defr8 |= DEFR8_DEFE8;
- /* On Gen2 the DEFR8 register for the first group also controls
+ /*
+ * On Gen2 the DEFR8 register for the first group also controls
* RGB output routing to DPAD0 and VSPD1 routing to DU0/1/2 for
* DU instances that support it.
*/
@@ -75,7 +76,8 @@ static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
defr8 |= DEFR8_VSCS;
}
} else {
- /* On Gen3 VSPD routing can't be configured, but DPAD routing
+ /*
+ * On Gen3 VSPD routing can't be configured, but DPAD routing
* needs to be set despite having a single option available.
*/
u32 crtc = ffs(possible_crtcs) - 1;
@@ -124,7 +126,8 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
if (rcdu->info->gen >= 3)
rcar_du_group_write(rgrp, DEFR10, DEFR10_CODE | DEFR10_DEFE10);
- /* Use DS1PR and DS2PR to configure planes priorities and connects the
+ /*
+ * Use DS1PR and DS2PR to configure planes priorities and connects the
* superposition 0 to DU0 pins. DU1 pins will be configured dynamically.
*/
rcar_du_group_write(rgrp, DORCR, DORCR_PG1D_DS1 | DORCR_DPRS);
@@ -177,7 +180,8 @@ static void __rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start)
void rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start)
{
- /* Many of the configuration bits are only updated when the display
+ /*
+ * Many of the configuration bits are only updated when the display
* reset (DRES) bit in DSYSR is set to 1, disabling *both* CRTCs. Some
* of those bits could be pre-configured, but others (especially the
* bits related to plane assignment to display timing controllers) need
@@ -213,7 +217,8 @@ int rcar_du_set_dpad0_vsp1_routing(struct rcar_du_device *rcdu)
if (!rcar_du_has(rcdu, RCAR_DU_FEATURE_EXT_CTRL_REGS))
return 0;
- /* RGB output routing to DPAD0 and VSP1D routing to DU0/1/2 are
+ /*
+ * RGB output routing to DPAD0 and VSP1D routing to DU0/1/2 are
* configured in the DEFR8 register of the first group. As this function
* can be called with the DU0 and DU1 CRTCs disabled, we need to enable
* the first group clock before accessing the register.
@@ -236,7 +241,8 @@ int rcar_du_group_set_routing(struct rcar_du_group *rgrp)
dorcr &= ~(DORCR_PG2T | DORCR_DK2S | DORCR_PG2D_MASK);
- /* Set the DPAD1 pins sources. Select CRTC 0 if explicitly requested and
+ /*
+ * Set the DPAD1 pins sources. Select CRTC 0 if explicitly requested and
* CRTC 1 in all other cases to avoid cloning CRTC 0 to DPAD0 and DPAD1
* by default.
*/
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index f4125c8ca902..91003ee13046 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -96,7 +96,8 @@ static const struct rcar_du_format_info rcar_du_format_infos[] = {
.pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC,
.edf = PnDDCR4_EDF_NONE,
},
- /* The following formats are not supported on Gen2 and thus have no
+ /*
+ * The following formats are not supported on Gen2 and thus have no
* associated .pnmr or .edf settings.
*/
{
@@ -153,7 +154,8 @@ int rcar_du_dumb_create(struct drm_file *file, struct drm_device *dev,
unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
unsigned int align;
- /* The R8A7779 DU requires a 16 pixels pitch alignment as documented,
+ /*
+ * The R8A7779 DU requires a 16 pixels pitch alignment as documented,
* but the R8A7790 DU seems to require a 128 bytes pitch alignment.
*/
if (rcar_du_needs(rcdu, RCAR_DU_QUIRK_ALIGN_128B))
@@ -419,7 +421,8 @@ static int rcar_du_properties_init(struct rcar_du_device *rcdu)
if (rcdu->props.alpha == NULL)
return -ENOMEM;
- /* The color key is expressed as an RGB888 triplet stored in a 32-bit
+ /*
+ * The color key is expressed as an RGB888 triplet stored in a 32-bit
* integer in XRGB8888 format. Bit 24 is used as a flag to disable (0)
* or enable source color keying (1).
*/
@@ -461,7 +464,8 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
if (ret < 0)
return ret;
- /* Initialize vertical blanking interrupts handling. Start with vblank
+ /*
+ * Initialize vertical blanking interrupts handling. Start with vblank
* disabled for all CRTCs.
*/
ret = drm_vblank_init(dev, (1 << rcdu->info->num_crtcs) - 1);
@@ -481,7 +485,8 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
rgrp->index = i;
rgrp->num_crtcs = min(rcdu->num_crtcs - 2 * i, 2U);
- /* If we have more than one CRTCs in this group pre-associate
+ /*
+ * If we have more than one CRTCs in this group pre-associate
* the low-order planes with CRTC 0 and the high-order planes
* with CRTC 1 to minimize flicker occurring when the
* association is changed.
@@ -537,7 +542,8 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
num_encoders = ret;
- /* Set the possible CRTCs and possible clones. There's always at least
+ /*
+ * Set the possible CRTCs and possible clones. There's always at least
* one way for all encoders to clone each other, set all bits in the
* possible clones field.
*/
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
index 1661f6201210..12d22f3db1af 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -59,7 +59,8 @@ static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds,
rcar_lvds_write(lvds, LVDPLLCR, pllcr);
- /* Select the input, hardcode mode 0, enable LVDS operation and turn
+ /*
+ * Select the input, hardcode mode 0, enable LVDS operation and turn
* bias circuitry on.
*/
lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN;
@@ -73,7 +74,8 @@ static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds,
LVDCR1_CHSTBY_GEN2(1) | LVDCR1_CHSTBY_GEN2(0) |
LVDCR1_CLKSTBY_GEN2);
- /* Turn the PLL on, wait for the startup delay, and turn the output
+ /*
+ * Turn the PLL on, wait for the startup delay, and turn the output
* on.
*/
lvdcr0 |= LVDCR0_PLLON;
@@ -140,7 +142,8 @@ static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
if (ret < 0)
return ret;
- /* Hardcode the channels and control signals routing for now.
+ /*
+ * Hardcode the channels and control signals routing for now.
*
* HSYNC -> CTRL0
* VSYNC -> CTRL1
@@ -202,7 +205,8 @@ void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
{
struct rcar_du_device *rcdu = lvds->dev;
- /* The internal LVDS encoder has a restricted clock frequency operating
+ /*
+ * The internal LVDS encoder has a restricted clock frequency operating
* range (30MHz to 150MHz on Gen2, 25.175MHz to 148.5MHz on Gen3). Clamp
* the clock accordingly.
*/
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
index dcde6288da6c..b0040478a3db 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -57,7 +57,8 @@ static bool rcar_du_plane_needs_realloc(struct rcar_du_plane *plane,
cur_state = to_rcar_plane_state(plane->plane.state);
- /* Lowering the number of planes doesn't strictly require reallocation
+ /*
+ * Lowering the number of planes doesn't strictly require reallocation
* as the extra hardware plane will be freed when committing, but doing
* so could lead to more fragmentation.
*/
@@ -155,7 +156,8 @@ int rcar_du_atomic_check_planes(struct drm_device *dev,
dev_dbg(rcdu->dev, "%s: checking plane (%u,%tu)\n", __func__,
plane->group->index, plane - plane->group->planes);
- /* If the plane is being disabled we don't need to go through
+ /*
+ * If the plane is being disabled we don't need to go through
* the full reallocation procedure. Just mark the hardware
* plane(s) as freed.
*/
@@ -168,7 +170,8 @@ int rcar_du_atomic_check_planes(struct drm_device *dev,
continue;
}
- /* If the plane needs to be reallocated mark it as such, and
+ /*
+ * If the plane needs to be reallocated mark it as such, and
* mark the hardware plane(s) as free.
*/
if (rcar_du_plane_needs_realloc(plane, plane_state)) {
@@ -186,7 +189,8 @@ int rcar_du_atomic_check_planes(struct drm_device *dev,
if (!needs_realloc)
return 0;
- /* Grab all plane states for the groups that need reallocation to ensure
+ /*
+ * Grab all plane states for the groups that need reallocation to ensure
* locking and avoid racy updates. This serializes the update operation,
* but there's not much we can do about it as that's the hardware
* design.
@@ -211,7 +215,8 @@ int rcar_du_atomic_check_planes(struct drm_device *dev,
if (IS_ERR(s))
return PTR_ERR(s);
- /* If the plane has been freed in the above loop its
+ /*
+ * If the plane has been freed in the above loop its
* hardware planes must not be added to the used planes
* bitmask. However, the current state doesn't reflect
* the free state yet, as we've modified the new state
@@ -259,14 +264,16 @@ int rcar_du_atomic_check_planes(struct drm_device *dev,
dev_dbg(rcdu->dev, "%s: allocating plane (%u,%tu)\n", __func__,
plane->group->index, plane - plane->group->planes);
- /* Skip planes that are being disabled or don't need to be
+ /*
+ * Skip planes that are being disabled or don't need to be
* reallocated.
*/
if (!plane_state->format ||
!rcar_du_plane_needs_realloc(plane, plane_state))
continue;
- /* Try to allocate the plane from the free planes currently
+ /*
+ * Try to allocate the plane from the free planes currently
* associated with the target CRTC to avoid restarting the CRTC
* group and thus minimize flicker. If it fails fall back to
* allocating from all free planes.
@@ -351,14 +358,16 @@ static void rcar_du_plane_setup_scanout(struct rcar_du_group *rgrp,
dma[1] = 0;
}
- /* Memory pitch (expressed in pixels). Must be doubled for interlaced
+ /*
+ * Memory pitch (expressed in pixels). Must be doubled for interlaced
* operation with 32bpp formats.
*/
rcar_du_plane_write(rgrp, index, PnMWR,
(interlaced && state->format->bpp == 32) ?
pitch * 2 : pitch);
- /* The Y position is expressed in raster line units and must be doubled
+ /*
+ * The Y position is expressed in raster line units and must be doubled
* for 32bpp formats, according to the R8A7790 datasheet. No mention of
* doubling the Y position is found in the R8A7779 datasheet, but the
* rule seems to apply there as well.
@@ -396,7 +405,8 @@ static void rcar_du_plane_setup_mode(struct rcar_du_group *rgrp,
u32 colorkey;
u32 pnmr;
- /* The PnALPHAR register controls alpha-blending in 16bpp formats
+ /*
+ * The PnALPHAR register controls alpha-blending in 16bpp formats
* (ARGB1555 and XRGB1555).
*
* For ARGB, set the alpha value to 0, and enable alpha-blending when
@@ -413,7 +423,8 @@ static void rcar_du_plane_setup_mode(struct rcar_du_group *rgrp,
pnmr = PnMR_BM_MD | state->format->pnmr;
- /* Disable color keying when requested. YUV formats have the
+ /*
+ * Disable color keying when requested. YUV formats have the
* PnMR_SPIM_TP_OFF bit set in their pnmr field, disabling color keying
* automatically.
*/
@@ -457,7 +468,8 @@ static void rcar_du_plane_setup_format_gen2(struct rcar_du_group *rgrp,
u32 ddcr2 = PnDDCR2_CODE;
u32 ddcr4;
- /* Data format
+ /*
+ * Data format
*
* The data format is selected by the DDDF field in PnMR and the EDF
* field in DDCR4.
@@ -589,7 +601,8 @@ static void rcar_du_plane_atomic_update(struct drm_plane *plane,
rcar_du_plane_setup(rplane);
- /* Check whether the source has changed from memory to live source or
+ /*
+ * Check whether the source has changed from memory to live source or
* from live source to memory. The source has been configured by the
* VSPS bit in the PnDDCR4 register. Although the datasheet states that
* the bit is updated during vertical blanking, it seems that updates
@@ -726,7 +739,8 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp)
unsigned int i;
int ret;
- /* Create one primary plane per CRTC in this group and seven overlay
+ /*
+ * Create one primary plane per CRTC in this group and seven overlay
* planes.
*/
rgrp->num_planes = rgrp->num_crtcs + 7;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.h b/drivers/gpu/drm/rcar-du/rcar_du_plane.h
index 8b91dd3a46e4..f62e09f195de 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.h
@@ -20,7 +20,8 @@
struct rcar_du_format_info;
struct rcar_du_group;
-/* The RCAR DU has 8 hardware planes, shared between primary and overlay planes.
+/*
+ * The RCAR DU has 8 hardware planes, shared between primary and overlay planes.
* As using overlay planes requires at least one of the CRTCs being enabled, no
* more than 7 overlay planes can be available. We thus create 1 primary plane
* per CRTC and 7 overlay planes, for a total of up to 9 KMS planes.
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index d46dce054442..75853ce369d4 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -73,7 +73,8 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
__rcar_du_plane_setup(crtc->group, &state);
- /* Ensure that the plane source configuration takes effect by requesting
+ /*
+ * Ensure that the plane source configuration takes effect by requesting
* a restart of the group. See rcar_du_plane_atomic_update() for a more
* detailed explanation.
*
@@ -417,7 +418,8 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp)
if (ret < 0)
return ret;
- /* The VSP2D (Gen3) has 5 RPFs, but the VSP1D (Gen2) is limited to
+ /*
+ * The VSP2D (Gen3) has 5 RPFs, but the VSP1D (Gen2) is limited to
* 4 RPFs.
*/
vsp->num_planes = rcdu->info->gen >= 3 ? 5 : 4;
--
Regards,
Laurent Pinchart
