On Thu, Jan 01, 1970 at 03:00:01AM +0300, Sergei Shtylyov wrote:
> Add the IMR-L[S]X3 clocks to the R8A7792 device tree.
>
> Based on the original patch by Roman Meshkevich
> <roman.meshkevich@xxxxxxxxxxxxxxxxxx>.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> ---
> arch/arm/boot/dts/r8a7792.dtsi | 15 ++++++++++++---
> include/dt-bindings/clock/r8a7792-clock.h | 7 +++++++
> 2 files changed, 19 insertions(+), 3 deletions(-)
>
> Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7792.dtsi
> @@ -927,16 +927,25 @@
> "renesas,cpg-mstp-clocks";
> reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
> clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
> - <&zg_clk>, <&zg_clk>, <&hp_clk>;
> + <&zg_clk>, <&zg_clk>, <&hp_clk>, <&zg_clk>,
> + <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
> + <&zg_clk>, <&zg_clk>;
> #clock-cells = <1>;
> clock-indices = <
> R8A7792_CLK_VIN5 R8A7792_CLK_VIN4
> R8A7792_CLK_VIN3 R8A7792_CLK_VIN2
> R8A7792_CLK_VIN1 R8A7792_CLK_VIN0
> - R8A7792_CLK_ETHERAVB
> + R8A7792_CLK_ETHERAVB R8A7792_CLK_IMR_LX3
> + R8A7792_CLK_IMR_LSX3_1 R8A7792_CLK_IMR_LSX3_0
> + R8A7792_CLK_IMR_LSX3_5 R8A7792_CLK_IMR_LSX3_4
> + R8A7792_CLK_IMR_LSX3_3 R8A7792_CLK_IMR_LSX3_2
> >;
> clock-output-names = "vin5", "vin4", "vin3", "vin2",
> - "vin1", "vin0", "etheravb";
> + "vin1", "vin0",
> + "etheravb", "imr-lx3",
> + "imr-lsx3-1", "imr-lsx3-0",
> + "imr-lsx3-5", "imr-lsx3-4",
> + "imr-lsx3-3", "imr-lsx3-2";
> };
> mstp9_clks: mstp9_clks@e6150994 {
> compatible = "renesas,r8a7792-mstp-clocks",
> Index: renesas/include/dt-bindings/clock/r8a7792-clock.h
> ===================================================================
> --- renesas.orig/include/dt-bindings/clock/r8a7792-clock.h
> +++ renesas/include/dt-bindings/clock/r8a7792-clock.h
> @@ -70,6 +70,13 @@
> #define R8A7792_CLK_VIN1 10
> #define R8A7792_CLK_VIN0 11
> #define R8A7792_CLK_ETHERAVB 12
> +#define R8A7792_CLK_IMR_LX3 21
> +#define R8A7792_CLK_IMR_LSX3_1 22
> +#define R8A7792_CLK_IMR_LSX3_0 23
> +#define R8A7792_CLK_IMR_LSX3_5 25
> +#define R8A7792_CLK_IMR_LSX3_4 26
> +#define R8A7792_CLK_IMR_LSX3_3 27
> +#define R8A7792_CLK_IMR_LSX3_2 28
>
> /* MSTP9 */
> #define R8A7792_CLK_GPIO7 4
>
I think this patch needs to be split in two, one for each file,
to allow queuing bindings and DT changes in different branches.
