[PATCH v2 14/14] drm: rcar-du: Configure DPAD0 routing through last group on Gen3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Gen3 SoCs DPAD0 routing is configured through the last CRTC group,
unlike on Gen2 where it is configured through the first CRTC group. Fix
the driver accordingly.

Fixes: 2427b3037710 ("drm: rcar-du: Add R8A7795 device support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/rcar-du/rcar_du_group.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
index 64738fca96d0..2abb2fdd143e 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -208,23 +208,30 @@ void rcar_du_group_restart(struct rcar_du_group *rgrp)
 
 int rcar_du_set_dpad0_vsp1_routing(struct rcar_du_device *rcdu)
 {
+	struct rcar_du_group *rgrp;
+	struct rcar_du_crtc *crtc;
 	int ret;
 
 	if (!rcar_du_has(rcdu, RCAR_DU_FEATURE_EXT_CTRL_REGS))
 		return 0;
 
-	/* RGB output routing to DPAD0 and VSP1D routing to DU0/1/2 are
-	 * configured in the DEFR8 register of the first group. As this function
-	 * can be called with the DU0 and DU1 CRTCs disabled, we need to enable
-	 * the first group clock before accessing the register.
+	/*
+	 * RGB output routing to DPAD0 and VSP1D routing to DU0/1/2 are
+	 * configured in the DEFR8 register of the first group on Gen2 and the
+	 * last group on Gen3. As this function can be called with the DU
+	 * channels of the corresponding CRTCs disabled, we need to enable the
+	 * group clock before accessing the register.
 	 */
-	ret = clk_prepare_enable(rcdu->crtcs[0].clock);
+	rgrp = &rcdu->groups[DIV_ROUND_UP(rcdu->num_crtcs, 2) - 1];
+	crtc = &rcdu->crtcs[rgrp->index * 2];
+
+	ret = clk_prepare_enable(crtc->clock);
 	if (ret < 0)
 		return ret;
 
-	rcar_du_group_setup_defr8(&rcdu->groups[0]);
+	rcar_du_group_setup_defr8(rgrp);
 
-	clk_disable_unprepare(rcdu->crtcs[0].clock);
+	clk_disable_unprepare(crtc->clock);
 
 	return 0;
 }
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux