From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
The Renesas Salvator-XS (Salvator-X 2nd version) development board can
be equipped with either an R-Car H3 ES2.0 or M3-W ES1.x SiP, which are
pin-compatible.
Add initial support for the common parts of the Salvator-XS board into
its own .dtsi file, to be included by the DTSes for the H3/M3-W
versions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/salvator-xs.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/salvator-xs.dtsi
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
new file mode 100644
index 000000000000..81227e3c2c6f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board";
+ compatible = "renesas,salvator-xs";
+};
+
+&extal_clk {
+ clock-frequency = <16640000>;
+};
--
2.1.4
