[PATCH] mmc: renesas_sdhi_core: on R-Car 2+, make use of CBSY bit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Most registers need to wait until the command is completed, not
necessarily until the bus is free. At least, R-Car 2+ SoCs can signal
that via the CBSY bit, so let's use it there instead of SCLKDIVEN to
save a little bit of delay.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---

Tested with a Renesas Lager board (H2). Moved big files around across different
SD cards, re- inserted cards multiple times. All worked fine.

@Dirk: can you do some additional testing for your use case? That would be much
appreciated!

Changes since RFC (from Jan 2016):
* rebased to latest code base
* use existing bit defines instead of creating new ones

 drivers/mmc/host/renesas_sdhi_core.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 82150a96639195..288153b5f6835e 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -395,12 +395,14 @@ static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
 		       sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
 }
 
-static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host)
+static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)
 {
 	int timeout = 1000;
+	/* CBSY is set when busy, SCLKDIVEN is cleared when busy */
+	u32 wait_state = (bit == TMIO_STAT_CMD_BUSY ? TMIO_STAT_CMD_BUSY : 0);
 
-	while (--timeout && !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
-			      & TMIO_STAT_SCLKDIVEN))
+	while (--timeout && (sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
+			      & bit) == wait_state)
 		udelay(1);
 
 	if (!timeout) {
@@ -413,18 +415,23 @@ static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host)
 
 static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
 {
+	u32 bit = TMIO_STAT_SCLKDIVEN;
+
 	switch (addr)
 	{
 	case CTL_SD_CMD:
 	case CTL_STOP_INTERNAL_ACTION:
 	case CTL_XFER_BLK_COUNT:
-	case CTL_SD_CARD_CLK_CTL:
 	case CTL_SD_XFER_LEN:
 	case CTL_SD_MEM_CARD_OPT:
 	case CTL_TRANSACTION_CTL:
 	case CTL_DMA_ENABLE:
 	case EXT_ACC:
-		return renesas_sdhi_wait_idle(host);
+		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+			bit = TMIO_STAT_CMD_BUSY;
+		/* fallthrough */
+	case CTL_SD_CARD_CLK_CTL:
+		return renesas_sdhi_wait_idle(host, bit);
 	}
 
 	return 0;
-- 
2.11.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux