The patch
spi: slave: Add SPI slave handler reporting uptime at previous message
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 29f9ffa0e1f9a17c866c04a01acfc9976d78f29a Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Date: Mon, 22 May 2017 15:11:44 +0200
Subject: [PATCH] spi: slave: Add SPI slave handler reporting uptime at
previous message
Add an example SPI slave handler responding with the uptime at the time
of reception of the last SPI message.
This can be used by an external microcontroller as a dead man's switch.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/spi/Kconfig | 6 ++
drivers/spi/Makefile | 1 +
drivers/spi/spi-slave-time.c | 129 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 136 insertions(+)
create mode 100644 drivers/spi/spi-slave-time.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index df8ddec24b5d..ade542c5bfd8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -796,6 +796,12 @@ config SPI_SLAVE
if SPI_SLAVE
+config SPI_SLAVE_TIME
+ tristate "SPI slave handler reporting boot up time"
+ help
+ SPI slave handler responding with the time of reception of the last
+ SPI message.
+
endif # SPI_SLAVE
endif # SPI
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e50852c6fcb8..fb078693dbe4 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -107,3 +107,4 @@ obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
# SPI slave protocol handlers
+obj-$(CONFIG_SPI_SLAVE_TIME) += spi-slave-time.o
diff --git a/drivers/spi/spi-slave-time.c b/drivers/spi/spi-slave-time.c
new file mode 100644
index 000000000000..f2e07a392d68
--- /dev/null
+++ b/drivers/spi/spi-slave-time.c
@@ -0,0 +1,129 @@
+/*
+ * SPI slave handler reporting uptime at reception of previous SPI message
+ *
+ * This SPI slave handler sends the time of reception of the last SPI message
+ * as two 32-bit unsigned integers in binary format and in network byte order,
+ * representing the number of seconds and fractional seconds (in microseconds)
+ * since boot up.
+ *
+ * Copyright (C) 2016-2017 Glider bvba
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Usage (assuming /dev/spidev2.0 corresponds to the SPI master on the remote
+ * system):
+ *
+ * # spidev_test -D /dev/spidev2.0 -p dummy-8B
+ * spi mode: 0x0
+ * bits per word: 8
+ * max speed: 500000 Hz (500 KHz)
+ * RX | 00 00 04 6D 00 09 5B BB ...
+ * ^^^^^ ^^^^^^^^
+ * seconds microseconds
+ */
+
+#include <linux/completion.h>
+#include <linux/module.h>
+#include <linux/sched/clock.h>
+#include <linux/spi/spi.h>
+
+
+struct spi_slave_time_priv {
+ struct spi_device *spi;
+ struct completion finished;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+ __be32 buf[2];
+};
+
+static int spi_slave_time_submit(struct spi_slave_time_priv *priv);
+
+static void spi_slave_time_complete(void *arg)
+{
+ struct spi_slave_time_priv *priv = arg;
+ int ret;
+
+ ret = priv->msg.status;
+ if (ret)
+ goto terminate;
+
+ ret = spi_slave_time_submit(priv);
+ if (ret)
+ goto terminate;
+
+ return;
+
+terminate:
+ dev_info(&priv->spi->dev, "Terminating\n");
+ complete(&priv->finished);
+}
+
+static int spi_slave_time_submit(struct spi_slave_time_priv *priv)
+{
+ u32 rem_us;
+ int ret;
+ u64 ts;
+
+ ts = local_clock();
+ rem_us = do_div(ts, 1000000000) / 1000;
+
+ priv->buf[0] = cpu_to_be32(ts);
+ priv->buf[1] = cpu_to_be32(rem_us);
+
+ spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1);
+
+ priv->msg.complete = spi_slave_time_complete;
+ priv->msg.context = priv;
+
+ ret = spi_async(priv->spi, &priv->msg);
+ if (ret)
+ dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret);
+
+ return ret;
+}
+
+static int spi_slave_time_probe(struct spi_device *spi)
+{
+ struct spi_slave_time_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->spi = spi;
+ init_completion(&priv->finished);
+ priv->xfer.tx_buf = priv->buf;
+ priv->xfer.len = sizeof(priv->buf);
+
+ ret = spi_slave_time_submit(priv);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, priv);
+ return 0;
+}
+
+static int spi_slave_time_remove(struct spi_device *spi)
+{
+ struct spi_slave_time_priv *priv = spi_get_drvdata(spi);
+
+ spi_slave_abort(spi);
+ wait_for_completion(&priv->finished);
+ return 0;
+}
+
+static struct spi_driver spi_slave_time_driver = {
+ .driver = {
+ .name = "spi-slave-time",
+ },
+ .probe = spi_slave_time_probe,
+ .remove = spi_slave_time_remove,
+};
+module_spi_driver(spi_slave_time_driver);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@xxxxxxxxx>");
+MODULE_DESCRIPTION("SPI slave reporting uptime at previous SPI message");
+MODULE_LICENSE("GPL v2");
--
2.11.0
