The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/r8a7794.dtsi | 124 ++++++++++++++++++++---------------------
1 file changed, 59 insertions(+), 65 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 9d137cdeaed96638..1d0ce0b4dafba8f4 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -968,71 +968,65 @@
status = "disabled";
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed
- * frequency clocks by default. Boards that provide audio
- * clocks should override them.
- */
- audio_clka: audio_clka {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clkb: audio_clkb {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clkc: audio_clkc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a7794-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>, <&usb_extal_clk>;
- clock-names = "extal", "usb_extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed
+ * frequency clocks by default. Boards that provide audio
+ * clocks should override them.
+ */
+ audio_clka: audio_clka {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkb: audio_clkb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkc: audio_clkc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7794-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
--
2.7.4
