Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices.
If enum values are defined, but never used, pinmux_pins[] contains
(zero-filled) holes. Such entries are treated as pin zero, which was
registered before, thus leading to pinctrl registration failures, as
seen on sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PH[0-7] from the enum to fix this.
Fixes: ef0fa5331a73e479 ("sh: Add pinmux for sh7269")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
Untested due to lack of hardware.
v2:
- Replace fake error messages by reference to sh7722,
- Add Reviewed-by.
---
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index 2a0ca8780f0d8c34..13c495a9fc0007b4 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -45,9 +45,7 @@ enum {
GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
- /* Port H */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+ /* Port H - Port H does not have a Data Register */
/* Port I - not on device */
--
2.7.4
