Hi Geert,
On Tue, May 09, 2017 at 04:11:54PM +0200, Geert Uytterhoeven wrote:
> On sh7722/Migo-R, pinctrl registration fails with:
>
> sh-pfc pfc-sh7722: pin 0 already registered
> sh-pfc pfc-sh7722: error during pin registration
> sh-pfc pfc-sh7722: could not register: -22
> sh-pfc: probe of pfc-sh7722 failed with error -22
>
> pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
> array initializers, where the GPIO_* enums serve as indices.
> As GPIO_PTQ7 is defined in the enum, but never used, pinmux_pins[]
> contains a (zero-filled) hole. Hence this entry is treated as pin zero,
> which was registered before, and initialization fails.
>
> According to the datasheet, port PTQ7 does not exist. Hence remove
> GPIO_PTQ7 from the enum to fix this.
>
> Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code")
> Reported-by: Magnus Damm <magnus.damm@xxxxxxxxx>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Tested-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Thank you
j
> ---
> Tested on sh7722/Migo-R.
> ---
> arch/sh/include/cpu-sh4/cpu/sh7722.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
> index 3bb74e534d0f8ca4..78961ab78a5a9c83 100644
> --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
> +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
> @@ -67,7 +67,7 @@ enum {
> GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
>
> /* PTQ */
> - GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
> + GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
> GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
>
> /* PTR */
> --
> 2.7.4
>
