[PATCH v4 1/7] arm64: dts: r8a7795: Add HDMI encoder support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>

Add DT nodes for the two HDMI encoders in disabled state.

Based on work by Koji Matsuoka.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 50 ++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 7d87dff70ac8..fdcafe7a85c3 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1789,11 +1789,13 @@
 				port@1 {
 					reg = <1>;
 					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
 					};
 				};
 				port@2 {
 					reg = <2>;
 					du_out_hdmi1: endpoint {
+						remote-endpoint = <&dw_hdmi1_in>;
 					};
 				};
 				port@3 {
@@ -1862,5 +1864,53 @@
 				};
 			};
 		};
+
+		hdmi0: hdmi0@fead0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi1: hdmi1@feae0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfeae0000 0 0x10000>;
+			interrupts = <0 436 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi1_in: endpoint {
+						remote-endpoint = <&du_out_hdmi1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
 	};
 };
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux