The power and current "shunt-resistor" attribute's 'show' function displays the resistor value in milli-Ohms, while the ABI description specifies it should be displayed in Ohms. Fix it. Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- drivers/iio/adc/max9611.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c index ec82106..4580ebd 100644 --- a/drivers/iio/adc/max9611.c +++ b/drivers/iio/adc/max9611.c @@ -438,10 +438,10 @@ static ssize_t max9611_shunt_resistor_show(struct device *dev, struct max9611_dev *max9611 = iio_priv(dev_to_iio_dev(dev)); unsigned int i, r; - i = max9611->shunt_resistor_uohm / 1000; - r = max9611->shunt_resistor_uohm % 1000; + i = max9611->shunt_resistor_uohm / 1000000; + r = max9611->shunt_resistor_uohm % 1000000; - return sprintf(buf, "%u.%03u\n", i, r); + return sprintf(buf, "%u.%06u\n", i, r); } static IIO_DEVICE_ATTR(in_power_shunt_resistor, 0444, -- 2.7.4
