Hi Ulrich,
Thank you for the patch.
On Thursday 27 Apr 2017 16:37:41 Ulrich Hecht wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> The panel backlight is controlled through a GPIO and a PWM channel.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index bf4674e..8558b27
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> @@ -280,6 +280,16 @@
> };
> };
> };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 50000>;
> +
> + brightness-levels = <256 128 64 16 8 4 0>;
> + default-brightness-level = <6>;
> +
> + enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &du {
> @@ -366,6 +376,11 @@
> function = "du";
> };
>
> + pwm1_pins: pwm {
> + groups = "pwm1_a";
> + function = "pwm1";
> + };
> +
> sdhi0_pins: sd0 {
> groups = "sdhi0_data4", "sdhi0_ctrl";
> function = "sdhi0";
> @@ -441,6 +456,13 @@
> };
> };
>
> +&pwm1 {
> + pinctrl-0 = <&pwm1_pins>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> +};
> +
> &scif1 {
> pinctrl-0 = <&scif1_pins>;
> pinctrl-names = "default";
--
Regards,
Laurent Pinchart
