This patch fixes an issue that this driver is possible to access
the registers before pm_runtime_get_sync() if a gadget driver is
installed first. After that, oops happens on R-Car Gen3 environment.
To avoid it, this patch changes the pm_runtime call timing from
probe/remove to udc_start/udc_stop.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/gadget/udc/renesas_usb3.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 5a2d845..10585da 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1799,6 +1799,9 @@ static int renesas_usb3_start(struct usb_gadget *gadget,
/* hook up the driver */
usb3->driver = driver;
+ pm_runtime_enable(usb3_to_dev(usb3));
+ pm_runtime_get_sync(usb3_to_dev(usb3));
+
renesas_usb3_init_controller(usb3);
return 0;
@@ -1816,6 +1819,9 @@ static int renesas_usb3_stop(struct usb_gadget *gadget)
renesas_usb3_stop_controller(usb3);
spin_unlock_irqrestore(&usb3->lock, flags);
+ pm_runtime_put(usb3_to_dev(usb3));
+ pm_runtime_disable(usb3_to_dev(usb3));
+
return 0;
}
@@ -1891,9 +1897,6 @@ static int renesas_usb3_remove(struct platform_device *pdev)
device_remove_file(&pdev->dev, &dev_attr_role);
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
usb_del_gadget_udc(&usb3->gadget);
__renesas_usb3_ep_free_request(usb3->ep0_req);
@@ -2099,9 +2102,6 @@ static int renesas_usb3_probe(struct platform_device *pdev)
usb3->workaround_for_vbus = priv->workaround_for_vbus;
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
dev_info(&pdev->dev, "probed\n");
return 0;
--
1.9.1
