Hi! This is a straight port from the BSP, enabling PWM1 and PWM2 on the Salvator-X boards. For r8a7796 it also adds the required infrastructure (clock and pins). Not fully tested because I cannot find my breakout adapter. Looks OK from the software side, though. CU Uli Ryo Kodama (2): clk: renesas: r8a7796: add PWM clock arm64: dts: r8a7796-salvator-x: Add PWM device support Takeshi Kihara (3): pinctrl: sh-pfc: r8a7796: Add PWM pins, groups and functions arm64: dts: r8a7796: Add PWM device nodes arm64: dts: r8a7795-salvator-x: Enable PWM arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 +++ arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 21 +++ arch/arm64/boot/dts/renesas/r8a7796.dtsi | 63 +++++++++ drivers/clk/renesas/r8a7796-cpg-mssr.c | 1 + drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 153 +++++++++++++++++++++ 5 files changed, 260 insertions(+) -- 2.7.4
