Re: [PATCH] PCI: Freeze PME scan before suspending devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lukas,

Thank you for the patch.

On Tuesday 18 Apr 2017 20:44:30 Lukas Wunner wrote:
> Laurent Pinchart reported that the Renesas R-Car H2 Lager board
> (r8a7790) crashes during suspend tests.  Geert Uytterhoeven managed to
> reproduce the issue on an M2-W Koelsch board (r8a7791):
> 
> It occurs when the PME scan runs, once per second.  During PME scan, the
> PCI host bridge (rcar-pci) registers are accessed while its module clock
> has already been disabled, leading to the crash.
> 
> One reproducer is to configure s2ram to use "s2idle" instead of "deep"
> suspend:
> 
> # echo 0 > /sys/module/printk/parameters/console_suspend
> # echo s2idle > /sys/power/mem_sleep
> # echo mem > /sys/power/state
> 
> Another reproducer is to write either "platform" or "processors" to
> /sys/power/pm_test.  It does not (or is less likely) to happen during
> full system suspend ("core" or "none") because system suspend also
> disables timers, and thus the workqueue handling PME scans no longer
> runs.  Geert believes the issue may still happen in the small window
> between disabling module clocks and disabling timers:
> 
> # echo 0 > /sys/module/printk/parameters/console_suspend
> # echo platform > /sys/power/pm_test    # Or "processors"
> # echo mem > /sys/power/state
> 
> (Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are
> enabled.)
> 
> Rafael Wysocki agrees that PME scans should be suspended before the host
> bridge registers become inaccessible.  To that end, queue the task on a
> workqueue that gets frozen before devices suspend.
> 
> Rafael notes however that as a result, some wakeup events may be missed
> if they are delivered via PME from a device without working IRQ (which
> hence must be polled) and occur after the workqueue has been frozen.
> If that turns out to be an issue in practice, it may be possible to
> solve it by calling pci_pme_list_scan() once directly from one of the
> host bridge's pm_ops callbacks.
> 
> Stacktrace for posterity:
> 
> PM: Syncing filesystems ... [   38.566237] done.
> PM: Preparing system for sleep (mem)
> Freezing user space processes ... [   38.579813] (elapsed 0.001 seconds)
> done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> PM: Suspending system (mem)
> PM: suspend of devices complete after 152.456 msecs
> PM: late suspend of devices complete after 2.809 msecs
> PM: noirq suspend of devices complete after 29.863 msecs
> suspend debug: Waiting for 5 second(s).
> Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
> pgd = c0003000
> [00000000] *pgd=80000040004003, *pmd=00000000
> Internal error: : 1211 [#1] SMP ARM
> Modules linked in:
> CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted
> 4.9.0-rc1-koelsch-00011-g68db9bc814362e7f #3383
> Hardware name: Generic R8A7791 (Flattened Device Tree)
> Workqueue: events pci_pme_list_scan
> task: eb56e140 task.stack: eb58e000
> PC is at pci_generic_config_read+0x64/0x6c
> LR is at rcar_pci_cfg_base+0x64/0x84
> pc : [<c041d7b4>]    lr : [<c04309a0>]    psr: 600d0093
> sp : eb58fe98  ip : c041d750  fp : 00000008
> r10: c0e2283c  r9 : 00000000  r8 : 600d0013
> r7 : 00000008  r6 : eb58fed6  r5 : 00000002  r4 : eb58feb4
> r3 : 00000000  r2 : 00000044  r1 : 00000008  r0 : 00000000
> Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
> Control: 30c5387d  Table: 6a9f6c80  DAC: 55555555
> Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210)
> Stack: (0xeb58fe98 to 0xeb590000)
> fe80:                                                       00000002
> 00000044 fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000
> eb78a000 eb78a000 fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000
> 00000000 eb78a000 c0e22830 fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0
> eb55f380 c0e22838 eb9a9800 c0235fbc ff00: eb55f380 c0e22838 eb55f380
> eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100 ff20: eb55f398 c02366c4
> eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000 ff40: 00000000
> 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380 ff60:
> 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000
> ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac
> eb5631c0 ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000
> 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000
> 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000
> 00000013 00000000 3a81336c 10ccd1dd [<c041d7b4>] (pci_generic_config_read)
> from [<c041d9b0>]
> (pci_bus_read_config_word+0x58/0x80)
> [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>]
> (pci_check_pme_status+0x34/0x78)
> [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>]
> (pci_pme_wakeup+0x28/0x54) [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>]
> (pci_pme_list_scan+0x58/0xb4) [<c0424ce0>] (pci_pme_list_scan) from
> [<c0235fbc>]
> (process_one_work+0x1bc/0x308)
> [<c0235fbc>] (process_one_work) from [<c02366c4>]
> (worker_thread+0x2a8/0x3e0) [<c02366c4>] (worker_thread) from [<c023a928>]
> (kthread+0xe4/0xfc) [<c023a928>] (kthread) from [<c0206d68>]
> (ret_from_fork+0x14/0x2c) Code: ea000000 e5903000 f57ff04f e3a00000
> (e5843000)
> ---[ end trace 667d43ba3aa9e589 ]---
> 
> Reported-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

My Lager board now fails to resume (but that's also the case without this 
patch, I'll have to investigate that separately) but the PCI crash is gone, so

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Cc: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> Cc: Yinghai Lu <yinghai@xxxxxxxxxx>
> Cc: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # 2.6.37+
> Fixes: df17e62e5bff ("PCI: Add support for polling PME state on suspended
> legacy PCI devices") Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
> ---
>  drivers/pci/pci.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index aa55501d2179..c561a9e4916a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1784,8 +1784,8 @@ static void pci_pme_list_scan(struct work_struct
> *work) }
>  	}
>  	if (!list_empty(&pci_pme_list))
> -		schedule_delayed_work(&pci_pme_work,
> -				      msecs_to_jiffies(PME_TIMEOUT));
> +		queue_delayed_work(system_freezable_wq, &pci_pme_work,
> +				   msecs_to_jiffies(PME_TIMEOUT));
>  	mutex_unlock(&pci_pme_list_mutex);
>  }
> 
> @@ -1850,8 +1850,9 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
>  			mutex_lock(&pci_pme_list_mutex);
>  			list_add(&pme_dev->list, &pci_pme_list);
>  			if (list_is_singular(&pci_pme_list))
> -				schedule_delayed_work(&pci_pme_work,
> -						      
msecs_to_jiffies(PME_TIMEOUT));
> +				queue_delayed_work(system_freezable_wq,
> +						   &pci_pme_work,
> +						   
msecs_to_jiffies(PME_TIMEOUT));
>  			mutex_unlock(&pci_pme_list_mutex);
>  		} else {
>  			mutex_lock(&pci_pme_list_mutex);

-- 
Regards,

Laurent Pinchart





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux