Hi Mathias, > From: Yoshihiro Shimoda, Sent: Friday, March 17, 2017 7:03 PM > > This patch adds support suspend/resume for R-Car controllers. > The controllers need firmware downloading and the current code has > such process only when probe timing. After suspend the system and > the power of controller down, the driver needs to re-download the firmware > in resume timing. This patch adds such a process. > Also, since previous xhci-plat code didnn't handle the clk in suspend/resume, > this patch set has such process. I'm afraid but would you review this patch set? This can be applied on the latest Greg's usb.git / usb-next branch at the moment. Best regards, Yoshihiro Shimoda > Yoshihiro Shimoda (3): > usb: host: xhci-plat: enable clk in resume timing > usb: host: xhci-plat: add resume_quirk() > usb: host: xhci-plat: set resume_quirk() for R-Car controllers > > drivers/usb/host/xhci-plat.c | 29 ++++++++++++++++++++++++++++- > drivers/usb/host/xhci-plat.h | 1 + > drivers/usb/host/xhci-rcar.c | 11 +++++++++++ > drivers/usb/host/xhci-rcar.h | 6 ++++++ > 4 files changed, 46 insertions(+), 1 deletion(-) > > -- > 1.9.1
