From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Current src->convert_rate will be set on .hw_param, and
be reset on .quit timing.
But, .hw_param will not be called again if user did Ctrl-Z + fg.
It should be reset on initial of .hw_param to keep its value.
Here, ctu.c already do this.
This patch solves this issue, other wise, MIXed sound will be
strange if user did like below.
> aplay -D plughw:0,0 sound_44100.wav &
> aplay -D plughw:0,1 sound_96000.wav
> Ctrl-Z
> fg # 96kHz will be played as 44.1kHz
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
---
sound/soc/sh/rcar/src.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c
index 42db48d..20b5b2e 100644
--- a/sound/soc/sh/rcar/src.c
+++ b/sound/soc/sh/rcar/src.c
@@ -167,6 +167,7 @@ static int rsnd_src_hw_params(struct rsnd_mod *mod,
* dpcm_fe_dai_hw_params()
* dpcm_be_dai_hw_params()
*/
+ src->convert_rate = 0;
if (fe->dai_link->dynamic) {
int stream = substream->stream;
struct snd_soc_dpcm *dpcm;
@@ -414,8 +415,6 @@ static int rsnd_src_quit(struct rsnd_mod *mod,
rsnd_mod_power_off(mod);
- src->convert_rate = 0;
-
/* reset sync convert_rate */
src->sync.val = 0;
--
1.9.1
