[PATCH] ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

R-Car Datasheet is indicating "SSICR.CKDV = 000 is invalid when
SSIWSR.WS_MODE = 1 or SSIWSR.CONT = 1".
Current driver will set CONT, thus, we shouldn't use CKDV = 000.
This patch fixup it.

Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
---
 sound/soc/sh/rcar/ssi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9594d44..d0602c1 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -245,6 +245,15 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
 	for (j = 0; j < ARRAY_SIZE(ssi_clk_mul_table); j++) {
 
 		/*
+		 * It will set SSIWSR.CONT here, but SSICR.CKDV = 000
+		 * with it is not allowed. (SSIWSR.WS_MODE with
+		 * SSICR.CKDV = 000 is not allowed either).
+		 * Skip it. See SSICR.CKDV
+		 */
+		if (j == 0)
+			continue;
+
+		/*
 		 * this driver is assuming that
 		 * system word is 32bit x chan
 		 * see rsnd_ssi_init()
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux