* Tobin C. Harding <me@xxxxxxxx> [2017-03-15 14:14:08 +1100]:
On Tue, Mar 14, 2017 at 07:25:54PM -0700, Matthew Giassa wrote:
Wrapping all complex macros with parentheses to resolve checkpatch
errors. This change, along with the preceding changes in this change
set, resolves all checkpatch warnings and errors for the file.
Signed-off-by: Matthew Giassa <matthew@xxxxxxxxxx>
---
drivers/staging/ks7010/ks_wlan_ioctl.h | 64 +++++++++++++++++-----------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/ks7010/ks_wlan_ioctl.h b/drivers/staging/ks7010/ks_wlan_ioctl.h
index 1251d7e..adc935d 100644
--- a/drivers/staging/ks7010/ks_wlan_ioctl.h
+++ b/drivers/staging/ks7010/ks_wlan_ioctl.h
@@ -15,43 +15,43 @@
#include <linux/wireless.h>
/* The low order bit identify a SET (0) or a GET (1) ioctl. */
-/* SIOCIWFIRSTPRIV + 0 */
-/* former KS_WLAN_GET_DRIVER_VERSION SIOCIWFIRSTPRIV + 1 */
-/* SIOCIWFIRSTPRIV + 2 */
-#define KS_WLAN_GET_FIRM_VERSION SIOCIWFIRSTPRIV + 3
+/* (SIOCIWFIRSTPRIV + 0) */
+/* former KS_WLAN_GET_DRIVER_VERSION (SIOCIWFIRSTPRIV + 1) */
+/* (SIOCIWFIRSTPRIV + 2) */
+#define KS_WLAN_GET_FIRM_VERSION (SIOCIWFIRSTPRIV + 3)
#ifdef WPS
-#define KS_WLAN_SET_WPS_ENABLE SIOCIWFIRSTPRIV + 4
-#define KS_WLAN_GET_WPS_ENABLE SIOCIWFIRSTPRIV + 5
-#define KS_WLAN_SET_WPS_PROBE_REQ SIOCIWFIRSTPRIV + 6
+#define KS_WLAN_SET_WPS_ENABLE (SIOCIWFIRSTPRIV + 4)
+#define KS_WLAN_GET_WPS_ENABLE (SIOCIWFIRSTPRIV + 5)
+#define KS_WLAN_SET_WPS_PROBE_REQ (SIOCIWFIRSTPRIV + 6)
#endif
-#define KS_WLAN_GET_EEPROM_CKSUM SIOCIWFIRSTPRIV + 7
-#define KS_WLAN_SET_PREAMBLE SIOCIWFIRSTPRIV + 8
-#define KS_WLAN_GET_PREAMBLE SIOCIWFIRSTPRIV + 9
-#define KS_WLAN_SET_POWER_SAVE SIOCIWFIRSTPRIV + 10
-#define KS_WLAN_GET_POWER_SAVE SIOCIWFIRSTPRIV + 11
-#define KS_WLAN_SET_SCAN_TYPE SIOCIWFIRSTPRIV + 12
-#define KS_WLAN_GET_SCAN_TYPE SIOCIWFIRSTPRIV + 13
-#define KS_WLAN_SET_RX_GAIN SIOCIWFIRSTPRIV + 14
-#define KS_WLAN_GET_RX_GAIN SIOCIWFIRSTPRIV + 15
-#define KS_WLAN_HOSTT SIOCIWFIRSTPRIV + 16 /* unused */
-//#define KS_WLAN_SET_REGION SIOCIWFIRSTPRIV + 17
-#define KS_WLAN_SET_BEACON_LOST SIOCIWFIRSTPRIV + 18
-#define KS_WLAN_GET_BEACON_LOST SIOCIWFIRSTPRIV + 19
+#define KS_WLAN_GET_EEPROM_CKSUM (SIOCIWFIRSTPRIV + 7)
+#define KS_WLAN_SET_PREAMBLE (SIOCIWFIRSTPRIV + 8)
+#define KS_WLAN_GET_PREAMBLE (SIOCIWFIRSTPRIV + 9)
+#define KS_WLAN_SET_POWER_SAVE (SIOCIWFIRSTPRIV + 10)
+#define KS_WLAN_GET_POWER_SAVE (SIOCIWFIRSTPRIV + 11)
+#define KS_WLAN_SET_SCAN_TYPE (SIOCIWFIRSTPRIV + 12)
+#define KS_WLAN_GET_SCAN_TYPE (SIOCIWFIRSTPRIV + 13)
+#define KS_WLAN_SET_RX_GAIN (SIOCIWFIRSTPRIV + 14)
+#define KS_WLAN_GET_RX_GAIN (SIOCIWFIRSTPRIV + 15)
+#define KS_WLAN_HOSTT (SIOCIWFIRSTPRIV + 16) /* unused */
+//#define KS_WLAN_SET_REGION (SIOCIWFIRSTPRIV + 17)
+#define KS_WLAN_SET_BEACON_LOST (SIOCIWFIRSTPRIV + 18)
+#define KS_WLAN_GET_BEACON_LOST (SIOCIWFIRSTPRIV + 19)
-#define KS_WLAN_SET_TX_GAIN SIOCIWFIRSTPRIV + 20
-#define KS_WLAN_GET_TX_GAIN SIOCIWFIRSTPRIV + 21
+#define KS_WLAN_SET_TX_GAIN (SIOCIWFIRSTPRIV + 20)
+#define KS_WLAN_GET_TX_GAIN (SIOCIWFIRSTPRIV + 21)
/* for KS7010 */
-#define KS_WLAN_SET_PHY_TYPE SIOCIWFIRSTPRIV + 22
-#define KS_WLAN_GET_PHY_TYPE SIOCIWFIRSTPRIV + 23
-#define KS_WLAN_SET_CTS_MODE SIOCIWFIRSTPRIV + 24
-#define KS_WLAN_GET_CTS_MODE SIOCIWFIRSTPRIV + 25
-/* SIOCIWFIRSTPRIV + 26 */
-/* SIOCIWFIRSTPRIV + 27 */
-#define KS_WLAN_SET_SLEEP_MODE SIOCIWFIRSTPRIV + 28 /* sleep mode */
-#define KS_WLAN_GET_SLEEP_MODE SIOCIWFIRSTPRIV + 29 /* sleep mode */
-/* SIOCIWFIRSTPRIV + 30 */
-/* SIOCIWFIRSTPRIV + 31 */
+#define KS_WLAN_SET_PHY_TYPE (SIOCIWFIRSTPRIV + 22)
+#define KS_WLAN_GET_PHY_TYPE (SIOCIWFIRSTPRIV + 23)
+#define KS_WLAN_SET_CTS_MODE (SIOCIWFIRSTPRIV + 24)
+#define KS_WLAN_GET_CTS_MODE (SIOCIWFIRSTPRIV + 25)
+/* (SIOCIWFIRSTPRIV + 26) */
+/* (SIOCIWFIRSTPRIV + 27) */
+#define KS_WLAN_SET_SLEEP_MODE (SIOCIWFIRSTPRIV + 28) /* sleep mode */
+#define KS_WLAN_GET_SLEEP_MODE (SIOCIWFIRSTPRIV + 29) /* sleep mode */
+/* (SIOCIWFIRSTPRIV + 30) */
+/* (SIOCIWFIRSTPRIV + 31) */
#ifdef __KERNEL__
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
Hi Matthew,
Sergei already mentioned the length of the subject line. If I may add
to what he said.
You may want to make your subject line (about) maximum 50
characters. Also, while we are at it, you may like to wrap your git
log lines at 72 characters.
One other thing, are you using git send-email? Your patches are
chained together.
From Documentation/process/5.Posting.rst
If you have a significant series of patches, it is customary to send
an introductory description as part zero. This convention is not
universally followed though; if you use it, remember that information
in the introduction does not make it into the kernel changelogs. So
please ensure that the patches, themselves, have complete changelog
information.
In general, the second and following parts of a multi-part patch
should be sent as a reply to the first part so that they all thread
together at the receiving end. Tools like git and quilt have commands
to mail out a set of patches with the proper threading. If you have a
long series, though, and are using git, please stay away from the
--chain-reply-to option to avoid creating exceptionally deep nesting.
Good luck,
Tobin.
Duely noted. Thank you for the heads-up Tobin.
-Matthew
