[PATCH 3/3] soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Power area A2VC0 was removed in revision ES2.0, cfr. Based on R-Car Gen3
Hardware User's Manual rev. 0.53E.

Hence remove it from the power area table when not running on ES1.x.

This is in line with the goal to:
  1. Support both the ES1.x and ES2.0 SoC revisions in a single binary
     for now,
  2. Make it clear which code supports ES1.x, so it can easily be
     identified and removed later, when production SoCs are deemed
     ubiquitous.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/soc/renesas/r8a7795-sysc.c       | 26 ++++++++++++++++++++++++--
 include/dt-bindings/power/r8a7795-sysc.h |  2 +-
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c
index 5e7537c96f7bbbcd..7412666187b30420 100644
--- a/drivers/soc/renesas/r8a7795-sysc.c
+++ b/drivers/soc/renesas/r8a7795-sysc.c
@@ -1,7 +1,7 @@
 /*
  * Renesas R-Car H3 System Controller
  *
- * Copyright (C) 2016 Glider bvba
+ * Copyright (C) 2016-2017 Glider bvba
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,12 +10,13 @@
 
 #include <linux/bug.h>
 #include <linux/kernel.h>
+#include <linux/sys_soc.h>
 
 #include <dt-bindings/power/r8a7795-sysc.h>
 
 #include "rcar-sysc.h"
 
-static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
+static struct rcar_sysc_area r8a7795_areas[] __initdata = {
 	{ "always-on",	    0, 0, R8A7795_PD_ALWAYS_ON,	-1, PD_ALWAYS_ON },
 	{ "ca57-scu",	0x1c0, 0, R8A7795_PD_CA57_SCU,	R8A7795_PD_ALWAYS_ON,
 	  PD_SCU },
@@ -40,6 +41,7 @@ static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
 	{ "a3vp",	0x340, 0, R8A7795_PD_A3VP,	R8A7795_PD_ALWAYS_ON },
 	{ "cr7",	0x240, 0, R8A7795_PD_CR7,	R8A7795_PD_ALWAYS_ON },
 	{ "a3vc",	0x380, 0, R8A7795_PD_A3VC,	R8A7795_PD_ALWAYS_ON },
+	/* A2VC0 exists on ES1.x only */
 	{ "a2vc0",	0x3c0, 0, R8A7795_PD_A2VC0,	R8A7795_PD_A3VC },
 	{ "a2vc1",	0x3c0, 1, R8A7795_PD_A2VC1,	R8A7795_PD_A3VC },
 	{ "3dg-a",	0x100, 0, R8A7795_PD_3DG_A,	R8A7795_PD_ALWAYS_ON },
@@ -50,7 +52,27 @@ static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
 	{ "a3ir",	0x180, 0, R8A7795_PD_A3IR,	R8A7795_PD_ALWAYS_ON },
 };
 
+
+	/*
+	 * Fixups for R-Car H3 revisions after ES1.x
+	 */
+
+static const struct soc_device_attribute r8a7795es1[] __initconst = {
+	{ .soc_id = "r8a7795", .revision = "ES1.*" },
+	{ /* sentinel */ }
+};
+
+static int __init r8a7795_sysc_init(void)
+{
+	if (!soc_device_match(r8a7795es1))
+		rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas),
+				  R8A7795_PD_A2VC0);
+
+	return 0;
+}
+
 const struct rcar_sysc_info r8a7795_sysc_info __initconst = {
+	.init = r8a7795_sysc_init,
 	.areas = r8a7795_areas,
 	.num_areas = ARRAY_SIZE(r8a7795_areas),
 };
diff --git a/include/dt-bindings/power/r8a7795-sysc.h b/include/dt-bindings/power/r8a7795-sysc.h
index ee2e26ba605ef9a3..ad679eeda1370a9d 100644
--- a/include/dt-bindings/power/r8a7795-sysc.h
+++ b/include/dt-bindings/power/r8a7795-sysc.h
@@ -33,7 +33,7 @@
 #define R8A7795_PD_CA53_SCU		21
 #define R8A7795_PD_3DG_E		22
 #define R8A7795_PD_A3IR			24
-#define R8A7795_PD_A2VC0		25
+#define R8A7795_PD_A2VC0		25	/* ES1.x only */
 #define R8A7795_PD_A2VC1		26
 
 /* Always-on power area */
-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux