[PATCH v5.1 04/10] drm: bridge: dw-hdmi: Fix the PHY power down sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PHY requires us to wait for the PHY to switch to low power mode
after deasserting TXPWRON and before asserting PDDQ in the power down
sequence, otherwise power down will fail.

The PHY power down can be monitored though the TX_READY bit, available
through I2C in the PHY registers, or the TX_PHY_LOCK bit, available
through the HDMI TX registers. As the two are equivalent, let's pick the
easier solution of polling the TX_PHY_LOCK bit.

The power down code is currently duplicated in multiple places. To avoid
spreading multiple calls to a TX_PHY_LOCK poll function, we have to
refactor the power down code and group it all in a single function.

Tests showed that one poll iteration was enough for TX_PHY_LOCK to
become low, without requiring any additional delay. Retrying the read
five times with a 1ms to 2ms delay between each attempt should thus be
more than enough.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Reviewed-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 52 +++++++++++++++++++++++++++++++++-------
 1 file changed, 43 insertions(+), 9 deletions(-)

Changes since v5:

- Fix compilation breakage due to reordering of the patches compared to v4

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index d863b3393aee..3a1cd4c7ac64 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -116,6 +116,7 @@ struct dw_hdmi_i2c {
 struct dw_hdmi_phy_data {
 	enum dw_hdmi_phy_type type;
 	const char *name;
+	unsigned int gen;
 	bool has_svsret;
 };
 
@@ -914,6 +915,40 @@ static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)
 			 HDMI_PHY_CONF0_SELDIPIF_MASK);
 }
 
+static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
+{
+	const struct dw_hdmi_phy_data *phy = hdmi->phy;
+	unsigned int i;
+	u16 val;
+
+	if (phy->gen == 1) {
+		dw_hdmi_phy_enable_tmds(hdmi, 0);
+		dw_hdmi_phy_enable_powerdown(hdmi, true);
+		return;
+	}
+
+	dw_hdmi_phy_gen2_txpwron(hdmi, 0);
+
+	/*
+	 * Wait for TX_PHY_LOCK to be deasserted to indicate that the PHY went
+	 * to low power mode.
+	 */
+	for (i = 0; i < 5; ++i) {
+		val = hdmi_readb(hdmi, HDMI_PHY_STAT0);
+		if (!(val & HDMI_PHY_TX_PHY_LOCK))
+			break;
+
+		usleep_range(1000, 2000);
+	}
+
+	if (val & HDMI_PHY_TX_PHY_LOCK)
+		dev_warn(hdmi->dev, "PHY failed to power down\n");
+	else
+		dev_dbg(hdmi->dev, "PHY powered down in %u iterations\n", i);
+
+	dw_hdmi_phy_gen2_pddq(hdmi, 1);
+}
+
 static int hdmi_phy_configure(struct dw_hdmi *hdmi)
 {
 	u8 val, msec;
@@ -946,11 +981,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
 		return -EINVAL;
 	}
 
-	/* gen2 tx power off */
-	dw_hdmi_phy_gen2_txpwron(hdmi, 0);
-
-	/* gen2 pddq */
-	dw_hdmi_phy_gen2_pddq(hdmi, 1);
+	dw_hdmi_phy_power_off(hdmi);
 
 	/* Leave low power consumption mode by asserting SVSRET. */
 	if (hdmi->phy->has_svsret)
@@ -1025,8 +1056,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
 	for (i = 0; i < 2; i++) {
 		dw_hdmi_phy_sel_data_en_pol(hdmi, 1);
 		dw_hdmi_phy_sel_interface_control(hdmi, 0);
-		dw_hdmi_phy_enable_tmds(hdmi, 0);
-		dw_hdmi_phy_enable_powerdown(hdmi, true);
 
 		ret = hdmi_phy_configure(hdmi);
 		if (ret)
@@ -1256,8 +1285,7 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi)
 	if (!hdmi->phy_enabled)
 		return;
 
-	dw_hdmi_phy_enable_tmds(hdmi, 0);
-	dw_hdmi_phy_enable_powerdown(hdmi, true);
+	dw_hdmi_phy_power_off(hdmi);
 
 	hdmi->phy_enabled = false;
 }
@@ -1827,23 +1855,29 @@ static const struct dw_hdmi_phy_data dw_hdmi_phys[] = {
 	{
 		.type = DW_HDMI_PHY_DWC_HDMI_TX_PHY,
 		.name = "DWC HDMI TX PHY",
+		.gen = 1,
 	}, {
 		.type = DW_HDMI_PHY_DWC_MHL_PHY_HEAC,
 		.name = "DWC MHL PHY + HEAC PHY",
+		.gen = 2,
 		.has_svsret = true,
 	}, {
 		.type = DW_HDMI_PHY_DWC_MHL_PHY,
 		.name = "DWC MHL PHY",
+		.gen = 2,
 		.has_svsret = true,
 	}, {
 		.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
 		.name = "DWC HDMI 3D TX PHY + HEAC PHY",
+		.gen = 2,
 	}, {
 		.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
 		.name = "DWC HDMI 3D TX PHY",
+		.gen = 2,
 	}, {
 		.type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
 		.name = "DWC HDMI 2.0 TX PHY",
+		.gen = 2,
 		.has_svsret = true,
 	}
 };
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux