Hi Jacopo, On Monday, February 20, 2017, Jacopo Mondi wrote: > Hello, > this is the first submission of combined GPIO and pin controller driver > for Renesas RZ/A1 SoC. > > Compared to my RFC series on the same subject, this new implementation > supports a single SoC. If more devices with a similar pin controller will > arrive later, we will consider supporting them through this driver. > > The series adds the driver itself and register the pincontroller in dtsi. > The pin controller hardware supports 12 ports, each of them is also a gpio > controller. > > The series makes use of pinctrl and pinmux generic function currently > available in Linus Walleij's linux-pinctrl.git tree. > > Testing done veryfing functionalities of hardware modules enabled in > device tree (SCIF2 for serial output, RIIC for accessing an internal > eeprom chip and user visible leds). > Gpio have been also verified using a i2c-gpio device in place of the > native RIIC one to access the same eeprom device. Functionally, I tested these patches on an RZ/A1H RSK board (after modifying the DT for the RSK vs the GENMAI board). The following worked fine: * SCIF * I2C * SDHI * Ethernet (The trick is you have to know what pins need to be set as bi-directional) I will look over the code and provide feedback separately. Cheers Chris
