This patch fixes an issue that a usb 1.1 device is not connected in
system resume and then the following message appeared if debug messages
are enabled:
usb 2-1: Waited 2000ms for CONNECT
To resolve this issue, the EHCI controller must be resumed after its
companion controllers. So, this patch adds such code on the driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/host/ehci-platform.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index a268d9e..3214300 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -34,6 +34,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/of.h>
#include "ehci.h"
@@ -297,6 +298,7 @@ static int ehci_platform_probe(struct platform_device *dev)
goto err_power;
device_wakeup_enable(hcd->self.controller);
+ device_enable_async_suspend(hcd->self.controller);
platform_set_drvdata(dev, hcd);
return err;
@@ -370,6 +372,7 @@ static int ehci_platform_resume(struct device *dev)
struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
struct platform_device *pdev = to_platform_device(dev);
struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+ struct device *companion_dev;
if (pdata->power_on) {
int err = pdata->power_on(pdev);
@@ -377,6 +380,10 @@ static int ehci_platform_resume(struct device *dev)
return err;
}
+ companion_dev = usb_of_get_companion_dev(hcd->self.controller);
+ if (companion_dev)
+ device_pm_wait_for_dev(hcd->self.controller, companion_dev);
+
ehci_resume(hcd, priv->reset_on_resume);
return 0;
}
--
1.9.1
