On Mon, Feb 6, 2017 at 1:46 PM, Mark Brown <broonie@xxxxxxxxxx> wrote:
> On Mon, Feb 06, 2017 at 10:02:13AM +0900, DongCV wrote:
>> From: Dong <cv-dong@xxxxxxxxxxx>
>>
>> This patch fixes the output warning logs and data loss when
>> performing mount/umount then remount the device with jffs2 format.
>
> This is not a good changelog since it does not describe what the problem
> with the driver is or how the change fixes it - it just says that there
> is a problem.
>
>> This is the warning logs when performing mount/umount then remount the device with jffs2 format:
>> "root@linaro-naro:~# mount -t jffs2 /dev/mtdblock2 /mnt/media
>> [ 3839.928013] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03b40000: 0x1900 instead
>> [ 3839.956515] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03b40004: 0x000c instead
>
> Please think hard before including long log messages in upstream
> reports, they often contain almost no useful information relative to
> their size so often obscure the relevant content in your message. Some
> subset is usually much better (eg, "produces lots of errors like X"
> here).
May I suggest the following:
spi: rspi: Fix bogus received byte in qspi_transfer_in()
When there are less than QSPI_BUFFER_SIZE remaining bytes to be received,
qspi_transfer_in() writes one bogus byte in the receive buffer, possibly
leading to a buffer overflow.
This can be reproduced by mounting, unmounting, and remounting a
jffs2-formatted device, causing lots of warnings like:
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x03b40000: 0x1900 instead
Remove the bogus write to fix this.
It's also a good idea to add a Fixes tag:
Fixes: 3be09bec42a800d4 ("spi: rspi: supports 32bytes buffer for
DUAL and QUAD")
(the code was moved afterwards, but both the origin and the move were
integrated in v4.10-rc1).
Finally:
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
