[PATCH v3 2/7] dt-bindings: media: Add MAX2175 binding description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree binding documentation for MAX2175 Rf to bits tuner
device.

Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/media/i2c/max2175.txt      | 61 ++++++++++++++++++++++
 .../devicetree/bindings/property-units.txt         |  1 +
 2 files changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/max2175.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt b/Documentation/devicetree/bindings/media/i2c/max2175.txt
new file mode 100644
index 0000000..f591ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/max2175.txt
@@ -0,0 +1,61 @@
+Maxim Integrated MAX2175 RF to Bits tuner
+-----------------------------------------
+
+The MAX2175 IC is an advanced analog/digital hybrid-radio receiver with
+RF to Bits® front-end designed for software-defined radio solutions.
+
+Required properties:
+--------------------
+- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner.
+- clocks: phandle to the fixed xtal clock.
+- clock-names: name of the fixed xtal clock.
+- port: child port node of a tuner that defines the local and remote
+  endpoints. The remote endpoint is assumed to be an SDR device
+  that is capable of receiving the digital samples from the tuner.
+
+Optional properties:
+--------------------
+- maxim,slave	      : phandle to the master tuner if it is a slave. This
+			is used to define two tuners in diversity mode
+			(1 master, 1 slave). By default each tuner is an
+			individual master.
+- maxim,refout-load-pF: load capacitance value (in pF) on reference
+			output drive level. The possible load values are
+			 0 (default - refout disabled)
+			10
+			20
+			30
+			40
+			60
+			70
+- maxim,am-hiz	      : empty property indicates AM Hi-Z filter path is
+			selected for AM antenna input. By default this
+			filter path is not used.
+
+Example:
+--------
+
+Board specific DTS file
+
+/* Fixed XTAL clock node */
+maxim_xtal: clock {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <36864000>;
+};
+
+/* A tuner device instance under i2c bus */
+max2175_0: tuner@60 {
+	compatible = "maxim,max2175";
+	reg = <0x60>;
+	clocks = <&maxim_xtal>;
+	clock-names = "xtal";
+	maxim,refout-load-pF = <10>;
+
+	port {
+		max2175_0_ep: endpoint {
+			remote-endpoint = <&slave_rx_device>;
+		};
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt
index 12278d7..f1f1c22 100644
--- a/Documentation/devicetree/bindings/property-units.txt
+++ b/Documentation/devicetree/bindings/property-units.txt
@@ -28,6 +28,7 @@ Electricity
 -ohms		: Ohms
 -micro-ohms	: micro Ohms
 -microvolt	: micro volts
+-pF		: pico farads
 
 Temperature
 ----------------------------------------
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux