From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
The limitation to 10/100Mbit speeds on R-Car Gen3 is valid for R-Car H3
ES1.0 only. Check for the exact SoC model to allow 1Gbps on newer
revisions of R-Car H3, and on R-Car M3-W.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Acked-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/renesas/ravb_main.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index f655c1c23765..6626bc5a6d7a 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -31,6 +31,7 @@
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
#include <asm/div64.h>
@@ -973,6 +974,11 @@ static void ravb_adjust_link(struct net_device *ndev)
phy_print_status(phydev);
}
+static const struct soc_device_attribute r8a7795es10[] = {
+ { .soc_id = "r8a7795", .revision = "ES1.0", },
+ { /* sentinel */ }
+};
+
/* PHY init function */
static int ravb_phy_init(struct net_device *ndev)
{
@@ -1008,10 +1014,10 @@ static int ravb_phy_init(struct net_device *ndev)
goto err_deregister_fixed_link;
}
- /* This driver only support 10/100Mbit speeds on Gen3
+ /* This driver only support 10/100Mbit speeds on R-Car H3 ES1.0
* at this time.
*/
- if (priv->chip_id == RCAR_GEN3) {
+ if (soc_device_match(r8a7795es10)) {
err = phy_set_max_speed(phydev, SPEED_100);
if (err) {
netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n");
--
2.7.0.rc3.207.g0ac5344
