Dear Stefan,
Cc: Geert,
I've tested the linux v4.10-rc2 for Gen2 Lager and found two issues
about DISPLAY-UNIT: Does not support 640x480 resolution & Does not
support 16-bit for color numbers.
"root@linaro-naro:~# fbset -xres 640 -yres 480 -laced 0
ioctl FBIOPUT_VSCREENINFO: Invalid argument"
"root@linaro-naro:~# fbset -depth 16 -rgba 5,6,5,0
ioctl FBIOPUT_VSCREENINFO: Invalid argument"
And I found the patch which I think it is the cause of this issues.
The commit name is '865afb1 drm/fb-helper: reject any changes to the fbdev'
If I reverted this patch and retested it on H2 board, the issue will be
gone!
Please have a look at the attached testlog file for detail.
Regards,
Dong
LAGER SPI_LOADER V0.27 2014.06.20
DEVICE S25FL512
U-Boot 2016.01 (Jul 27 2016 - 15:27:42 +0900)
CPU: Renesas Electronics R8A7790 rev 2.0
Board: Lager
I2C: ready
DRAM: 512 MiB
MMC: sh_mmcif: 0, sh-sdhi: 1, sh-sdhi: 2
SF: Detected S25FL512S_256K with page size 512 Bytes, erase size 256 KiB, total 64 MiB
In: serial_sh
Out: serial_sh
Err: serial_sh
Net: sh_eth
Hit any key to stop autoboot: 0
sh_eth Waiting for PHY auto negotiation to complete.. done
sh_eth: 100Base/Half
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
DHCP client bound to address 192.168.1.235 (5781 ms)
Using sh_eth device
TFTP from server 192.168.1.225; our IP address is 192.168.1.235
Filename 'lager/uImage.dtb'.
Load address: 0x40007fc0
Loading: #################################################################
#################################################################
#################################################################
#############################################################
7.5 MiB/s
done
Bytes transferred = 3750536 (393a88 hex)
## Booting kernel from Legacy Image at 40007fc0 ...
Image Name: Linux-v4.10-rc2
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3750472 Bytes = 3.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.10.0-rc2-dirty (dong@dong-Jinso) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #275 SMP Thu Jan 19 13:29:13 JST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Lager
[ 0.000000] OF: fdt:Ignoring memory block 0x140000000 - 0x200000000
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a32840, node_mem_map ef7f9000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 12 pages/cpu @ef775000 s25152 r0 d24000 u49152
[ 0.000000] pcpu-alloc: s25152 r0 d24000 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1029252K/1048576K available (6144K kernel code, 207K rwdata, 1488K rodata, 1024K init, 300K bss, 19324K reserved, 0K cma-reserved, 262144K high)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a33c60 ( 208 kB)
[ 0.000000] .bss : 0xc0a35000 - 0xc0a8020c ( 301 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 10.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000004] sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
[ 0.000012] Switching to timer-based delay loop, resolution 100ns
[ 0.000521] Console: colour dummy device 80x30
[ 0.000543] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[ 0.000555] pid_max: default: 32768 minimum: 301
[ 0.000667] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000675] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001168] CPU: Testing write buffer coherency: ok
[ 0.001423] CPU0: update cpu_capacity 1535
[ 0.001430] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002437] Setting up static identity map for 0x40100000 - 0x40100058
[ 0.003030] smp: Bringing up secondary CPUs ...
[ 0.005231] CPU1: update cpu_capacity 1535
[ 0.005237] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006199] CPU2: update cpu_capacity 1535
[ 0.006205] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007167] CPU3: update cpu_capacity 1535
[ 0.007172] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007816] CPU4: failed to boot: -22
[ 0.008461] CPU5: failed to boot: -22
[ 0.009107] CPU6: failed to boot: -22
[ 0.009747] CPU7: failed to boot: -22
[ 0.009853] smp: Brought up 1 node, 4 CPUs
[ 0.009860] SMP: Total of 4 processors activated (80.00 BogoMIPS).
[ 0.009899] CPU: All CPU(s) started in SVC mode.
[ 0.010938] devtmpfs: initialized
[ 0.020863] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.021250] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.021369] pinctrl core: initialized pinctrl subsystem
[ 0.021512] Detected Renesas R-Car Gen2 r8a7790 ES2.0
[ 0.022071] NET: Registered protocol family 16
[ 0.022226] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.023285] No ATAGs?
[ 0.023313] hw-breakpoint: Failed to enable monitor mode on CPU 0.
[ 0.023418] IRQ2 is asserted, installing da9063/da9210 regulator quirk
[ 0.026120] renesas_irqc e61c0000.interrupt-controller: driving 4 irqs
[ 0.031088] sh-pfc e6060000.pfc: r8a77900_pfc support registered
[ 0.046854] vgaarb: loaded
[ 0.047096] SCSI subsystem initialized
[ 0.047269] libata version 3.00 loaded.
[ 0.047483] usbcore: registered new interface driver usbfs
[ 0.047528] usbcore: registered new interface driver hub
[ 0.047624] usbcore: registered new device driver usb
[ 0.048869] i2c-sh_mobile e6520000.i2c: I2C adapter 6, bus speed 100000 Hz
[ 0.049297] i2c 7-0058: clearing da9063/da9210 interrupts
[ 0.050457] i2c 7-0058: IRQ2 is not asserted, removing quirk
[ 0.050608] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 100000 Hz
[ 0.050833] media: Linux media interface: v0.10
[ 0.050881] Linux video capture interface: v2.00
[ 0.051224] sh_cmt ffca0000.timer: ch0: used for clock events
[ 0.051238] sh_cmt ffca0000.timer: ch1: used as clock source
[ 0.051249] clocksource: ffca0000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000000 ns
[ 0.051873] Advanced Linux Sound Architecture Driver Initialized.
[ 0.052406] sh_cmt ffca0000.timer: PM domain always-on will not be powered off
[ 0.052558] clocksource: Switched to clocksource arch_sys_counter
[ 0.061313] NET: Registered protocol family 2
[ 0.061739] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.061791] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.061886] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.061924] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.061948] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.062105] NET: Registered protocol family 1
[ 0.062510] RPC: Registered named UNIX socket transport module.
[ 0.062517] RPC: Registered udp transport module.
[ 0.062523] RPC: Registered tcp transport module.
[ 0.062528] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.062537] PCI: CLS 0 bytes, default 64
[ 0.064227] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.064759] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.065230] NFS: Registering the id_resolver key type
[ 0.065251] Key type id_resolver registered
[ 0.065257] Key type id_legacy registered
[ 0.065271] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.065278] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.066766] bounce: pool size: 64 pages
[ 0.066820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.066828] io scheduler noop registered
[ 0.066834] io scheduler deadline registered
[ 0.066859] io scheduler cfq registered (default)
[ 0.069048] gpio_rcar e6050000.gpio: driving 32 GPIOs
[ 0.070217] gpio_rcar e6051000.gpio: driving 30 GPIOs
[ 0.071347] gpio_rcar e6052000.gpio: driving 30 GPIOs
[ 0.072532] gpio_rcar e6053000.gpio: driving 32 GPIOs
[ 0.073775] gpio_rcar e6054000.gpio: driving 32 GPIOs
[ 0.074985] gpio_rcar e6055000.gpio: driving 32 GPIOs
[ 0.075720] pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
[ 0.075883] pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
[ 0.075892] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
[ 0.075900] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.075931] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
[ 0.075952] pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
[ 0.075963] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.076180] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.076201] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.076273] pci 0000:00:01.0: supports D1 D2
[ 0.076280] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.076487] pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.076508] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.076579] pci 0000:00:02.0: supports D1 D2
[ 0.076585] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.076793] PCI: bus0: Fast back to back transfers disabled
[ 0.076803] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.076882] pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
[ 0.076893] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
[ 0.076929] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.076963] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.077203] pci-rcar-gen2 ee0b0000.pci: PCI: bus0 revision 11
[ 0.077349] pci-rcar-gen2 ee0b0000.pci: PCI host bridge to bus 0001:01
[ 0.077358] pci_bus 0001:01: root bus resource [mem 0xee0a0000-0xee0a10ff]
[ 0.077365] pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.077388] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
[ 0.077405] pci 0001:01:00.0: reg 0x10: [mem 0xee0b0800-0xee0b0bff]
[ 0.077416] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.077607] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.077628] pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.077699] pci 0001:01:01.0: supports D1 D2
[ 0.077706] pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.077893] pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.077914] pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.077984] pci 0001:01:02.0: supports D1 D2
[ 0.077990] pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.078185] PCI: bus1: Fast back to back transfers disabled
[ 0.078195] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.078318] pci 0001:01:01.0: BAR 0: assigned [mem 0xee0a0000-0xee0a0fff]
[ 0.078330] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0a1000-0xee0a10ff]
[ 0.078357] pci 0001:01:01.0: enabling device (0140 -> 0142)
[ 0.078389] pci 0001:01:02.0: enabling device (0140 -> 0142)
[ 0.078558] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
[ 0.078706] pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0002:02
[ 0.078714] pci_bus 0002:02: root bus resource [mem 0xee0c0000-0xee0c10ff]
[ 0.078722] pci_bus 0002:02: No busn resource found for root bus, will use [bus 02-ff]
[ 0.078746] pci 0002:02:00.0: [1033:0000] type 00 class 0x060000
[ 0.078763] pci 0002:02:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
[ 0.078774] pci 0002:02:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.078964] pci 0002:02:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.078986] pci 0002:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.079056] pci 0002:02:01.0: supports D1 D2
[ 0.079063] pci 0002:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.079257] pci 0002:02:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.079278] pci 0002:02:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.079347] pci 0002:02:02.0: supports D1 D2
[ 0.079354] pci 0002:02:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.079556] PCI: bus2: Fast back to back transfers disabled
[ 0.079565] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.079740] pci 0002:02:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
[ 0.079751] pci 0002:02:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
[ 0.079779] pci 0002:02:01.0: enabling device (0140 -> 0142)
[ 0.079810] pci 0002:02:02.0: enabling device (0140 -> 0142)
[ 0.093716] DA9210: Bringing 1080000uV into 1000000-1000000uV
[ 0.099446] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.100610] SuperH (H)SCI(F) driver initialized
[ 0.101111] e6c50000.serial: ttySC1 at MMIO 0xe6c50000 (irq = 101, base_baud = 0) is a scifa
[ 0.101659] e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 102, base_baud = 0) is a scif
[ 3.483470] console [ttySC0] enabled
[ 3.494704] [drm] Initialized
[ 3.504605] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.524435] [drm] No driver support for vblank timestamp query.
[ 3.557055] da9063 7-0058: Device detected (chip-ID: 0x61, var-ID: 0x30)
[ 3.578311] random: fast init done
[ 3.601193] scsi host0: sata_rcar
[ 3.611348] ata1: SATA max UDMA/133 irq 104
[ 3.624666] renesas_spi e6b10000.spi: DMA available
[ 3.640103] m25p80 spi0.0: s25fl512s (65536 Kbytes)
[ 3.654765] 3 ofpart partitions found on MTD device spi0.0
[ 3.671201] Creating 3 MTD partitions on "spi0.0":
[ 3.685558] 0x000000000000-0x000000040000 : "loader"
[ 3.701323] 0x000000040000-0x000000440000 : "user"
[ 3.716489] 0x000000440000-0x000004000000 : "flash"
[ 3.731936] renesas_spi e6b10000.spi: probed
[ 3.745559] spi_sh_msiof e6e10000.spi: DMA available
[ 3.761174] libphy: Fixed MDIO Bus: probed
[ 3.774028] CAN device driver interface
[ 3.786414] libphy: sh_mii: probed
[ 3.797685] sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:3d:c1, IRQ 103.
[ 3.824847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.844411] ehci-pci: EHCI PCI platform driver
[ 3.857848] ehci-pci 0000:00:02.0: EHCI Host Controller
[ 3.873521] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 3.895792] ehci-pci 0000:00:02.0: irq 119, io mem 0xee081000
[ 3.942565] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
[ 3.960491] hub 1-0:1.0: USB hub found
[ 3.971755] hub 1-0:1.0: 1 port detected
[ 3.983917] ehci-pci 0001:01:02.0: EHCI Host Controller
[ 3.999591] ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
[ 4.021841] ehci-pci 0001:01:02.0: irq 120, io mem 0xee0a1000
[ 4.062565] ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
[ 4.062569] ata1: link resume succeeded after 1 retries
[ 4.096109] hub 2-0:1.0: USB hub found
[ 4.107371] hub 2-0:1.0: 1 port detected
[ 4.119538] ehci-pci 0002:02:02.0: EHCI Host Controller
[ 4.135212] ehci-pci 0002:02:02.0: new USB bus registered, assigned bus number 3
[ 4.157462] ehci-pci 0002:02:02.0: irq 121, io mem 0xee0c1000
[ 4.172581] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.212563] ehci-pci 0002:02:02.0: USB 2.0 started, EHCI 1.00
[ 4.230435] hub 3-0:1.0: USB hub found
[ 4.241699] hub 3-0:1.0: 1 port detected
[ 4.253818] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.272344] ohci-pci: OHCI PCI platform driver
[ 4.285721] ohci-pci 0000:00:01.0: OHCI PCI host controller
[ 4.302431] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 4
[ 4.324627] ohci-pci 0000:00:01.0: irq 119, io mem 0xee080000
[ 4.433213] hub 4-0:1.0: USB hub found
[ 4.444476] hub 4-0:1.0: 1 port detected
[ 4.456589] ohci-pci 0001:01:01.0: OHCI PCI host controller
[ 4.473303] ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 5
[ 4.495499] ohci-pci 0001:01:01.0: irq 120, io mem 0xee0a0000
[ 4.613202] hub 5-0:1.0: USB hub found
[ 4.624465] hub 5-0:1.0: 1 port detected
[ 4.636587] ohci-pci 0002:02:01.0: OHCI PCI host controller
[ 4.653301] ohci-pci 0002:02:01.0: new USB bus registered, assigned bus number 6
[ 4.675495] ohci-pci 0002:02:01.0: irq 121, io mem 0xee0c0000
[ 4.793207] hub 6-0:1.0: USB hub found
[ 4.804472] hub 6-0:1.0: 1 port detected
[ 4.816909] sh-pfc e6060000.pfc: pin GP_5_19 already requested by ee090000.pci; cannot claim for e6590000.usb
[ 4.846634] sh-pfc e6060000.pfc: pin-179 (e6590000.usb) status -22
[ 4.865155] sh-pfc e6060000.pfc: could not request pin 179 (GP_5_19) from group usb0_ovc_vbus on device sh-pfc
[ 4.895393] renesas_usbhs e6590000.usb: Error applying setting, reverse things back
[ 4.918345] renesas_usbhs: probe of e6590000.usb failed with error -22
[ 4.938094] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 4.964850] mousedev: PS/2 mouse device common for all mice
[ 4.997180] da9063-rtc da9063-rtc: rtc core: registered da9063-rtc as rtc0
[ 5.022872] i2c /dev entries driver
[ 5.035083] i2c-sh_mobile e6500000.i2c: I2C adapter 4, bus speed 100000 Hz
[ 5.056871] i2c-sh_mobile e6510000.i2c: I2C adapter 5, bus speed 100000 Hz
[ 5.078005] adv7180 6-0020: chip found @ 0x20 (e6520000.i2c)
[ 5.113726] Error: Driver 'adv7511' is already registered, aborting...
[ 5.134024] rcar_jpu fe980000.jpeg-codec: encoder device registered as /dev/video0
[ 5.156715] rcar_jpu fe980000.jpeg-codec: decoder device registered as /dev/video1
[ 5.197415] rcar-vin e6ef1000.video: Device registered as video30
[ 5.218245] rcar_thermal e61f0000.thermal: 1 sensor probed
[ 5.241129] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[ 5.256240] sh_mobile_sdhi ee140000.sd: Got CD GPIO
[ 5.322587] sh_mmcif ee220000.mmc: Chip version 0x0003, clock rate 12MHz
[ 5.343408] usbcore: registered new interface driver usbhid
[ 5.360107] usbhid: USB HID core driver
[ 5.378506] rcar_sound ec500000.sound: probed
[ 5.391907] NET: Registered protocol family 10
[ 5.405860] Segment Routing with IPv6
[ 5.416877] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.435160] NET: Registered protocol family 17
[ 5.448487] can: controller area network core (rev 20120528 abi 9)
[ 5.467053] NET: Registered protocol family 29
[ 5.480369] can: raw protocol (rev 20120528)
[ 5.493164] can: broadcast manager protocol (rev 20161123 t)
[ 5.510129] can: netlink gateway (rev 20130117) max_hops=1
[ 5.526646] Key type dns_resolver registered
[ 5.539520] Registering SWP/SWPB emulation handler
[ 5.556463] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.576316] [drm] No driver support for vblank timestamp query.
[ 5.620216] Console: switching to colour frame buffer device 128x48
[ 5.645484] rcar-du feb00000.display: fb0: frame buffer device
[ 5.663575] [drm] Device feb00000.display probed
[ 5.677994] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[ 5.902736] sh_mobile_sdhi ee100000.sd: mmc1 base at 0xee100000 max clock rate 195 MHz
[ 5.907554] mmc0: new high speed MMC card at address 0001
[ 5.907965] mmcblk0: mmc0:0001 MMC08G 7.33 GiB
[ 5.908146] mmcblk0boot0: mmc0:0001 MMC08G partition 1 2.00 MiB
[ 5.932674] mmcblk0boot1: mmc0:0001 MMC08G partition 2 2.00 MiB
[ 5.934481] mmcblk0: p1 p2
[ 6.000596] sh_mobile_sdhi ee140000.sd: Got CD GPIO
[ 6.222729] sh_mobile_sdhi ee140000.sd: mmc2 base at 0xee140000 max clock rate 97 MHz
[ 6.247778] asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
[ 6.270765] input: keyboard as /devices/platform/keyboard/input/input0
[ 6.292266] da9063-rtc da9063-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 6.414807] Micrel KSZ8041RNLI ee700000.etherne:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.etherne:01, irq=340)
[ 6.452689] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.444465] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 8.472581] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.502567] Sending DHCP requests ..., OK
[ 15.862565] IP-Config: Got DHCP answer from 192.168.1.225, my address is 192.168.1.235
[ 15.886298] IP-Config: Complete:
[ 15.895970] device=eth0, hwaddr=2e:09:0a:00:3d:c1, ipaddr=192.168.1.235, mask=255.255.255.0, gw=192.168.1.225
[ 15.926992] host=192.168.1.235, domain=, nis-domain=(none)
[ 15.944734] bootserver=192.168.1.225, rootserver=192.168.1.225, rootpath= nameserver0=192.168.1.225, nameserver1=192.168.1.235, nameserver2=8.8.8.8
[ 15.986995] SDHI0 Vcc: disabling
[ 15.996673] SDHI2 Vcc: disabling
[ 16.006343] SDHI0 VccQ: disabling
[ 16.016272] SDHI2 VccQ: disabling
[ 16.026199] ALSA device list:
[ 16.035085] #0: rsnd-dai.0-ak4642-hifi
[ 16.051780] VFS: Mounted root (nfs filesystem) on device 0:13.
[ 16.069610] devtmpfs: mounted
[ 16.079183] Freeing unused kernel memory: 1024K
[ 16.475053] init: ureadahead main process (1012) terminated with status 5
[ 17.822677] udevd[1078]: starting version 175
[ 18.067074] random: crng init done
[ 18.919687] init: plymouth main process (1013) killed by ABRT signal
[ 18.939825] init: plymouth-splash main process (1820) terminated with status 2
[ 19.032579] init: failsafe main process (1792) killed by TERM signal
[ OK ]ting sensors limits
[ 20.325333] init: alsa-restore main process (1910) terminated with status 99
[ 20.493206] init: plymouth-stop pre-start process (1952) terminated with status 1
Last login: Sat Jan 1 00:00:16 [ 20.521622] init: tty1 main process (1953) killed by TERM signal
UTC 2000 on tty1
Welcome to Linaro 13.04 (GNU/Linux 4.10.0-rc2-dirty armv7l)
* Documentation: https://wiki.linaro.org/
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~# uname -a
Linux linaro-naro 4.10.0-rc2-dirty #275 SMP Thu Jan 19 13:29:13 JST 2017 armv7l armv7l armv7l GNU/Linux
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~# fbset -xres 640 -yres 480 -laced 0
ioctl FBIOPUT_VSCREENINFO: Invalid argument
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
LAGER SPI_LOADER V0.27 2014.06.20
DEVICE S25FL512
U-Boot 2016.01 (Jul 27 2016 - 15:27:42 +0900)
CPU: Renesas Electronics R8A7790 rev 2.0
Board: Lager
I2C: ready
DRAM: 512 MiB
MMC: sh_mmcif: 0, sh-sdhi: 1, sh-sdhi: 2
SF: Detected S25FL512S_256K with page size 512 Bytes, erase size 256 KiB, total 64 MiB
In: serial_sh
Out: serial_sh
Err: serial_sh
Net: sh_eth
Hit any key to stop autoboot: 0
sh_eth Waiting for PHY auto negotiation to complete.. done
sh_eth: 100Base/Half
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
DHCP client bound to address 192.168.1.235 (5782 ms)
Using sh_eth device
TFTP from server 192.168.1.225; our IP address is 192.168.1.235
Filename 'lager/uImage.dtb'.
Load address: 0x40007fc0
Loading: #################################################################
#################################################################
#################################################################
#############################################################
7.6 MiB/s
done
Bytes transferred = 3750536 (393a88 hex)
## Booting kernel from Legacy Image at 40007fc0 ...
Image Name: Linux-v4.10-rc2
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3750472 Bytes = 3.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.10.0-rc2-dirty (dong@dong-Jinso) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #275 SMP Thu Jan 19 13:29:13 JST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Lager
[ 0.000000] OF: fdt:Ignoring memory block 0x140000000 - 0x200000000
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a32840, node_mem_map ef7f9000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 12 pages/cpu @ef775000 s25152 r0 d24000 u49152
[ 0.000000] pcpu-alloc: s25152 r0 d24000 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1029252K/1048576K available (6144K kernel code, 207K rwdata, 1488K rodata, 1024K init, 300K bss, 19324K reserved, 0K cma-reserved, 262144K high)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a33c60 ( 208 kB)
[ 0.000000] .bss : 0xc0a35000 - 0xc0a8020c ( 301 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 10.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000004] sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
[ 0.000012] Switching to timer-based delay loop, resolution 100ns
[ 0.000520] Console: colour dummy device 80x30
[ 0.000543] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[ 0.000555] pid_max: default: 32768 minimum: 301
[ 0.000668] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000676] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001168] CPU: Testing write buffer coherency: ok
[ 0.001423] CPU0: update cpu_capacity 1535
[ 0.001431] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002434] Setting up static identity map for 0x40100000 - 0x40100058
[ 0.003029] smp: Bringing up secondary CPUs ...
[ 0.005243] CPU1: update cpu_capacity 1535
[ 0.005249] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006207] CPU2: update cpu_capacity 1535
[ 0.006213] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007174] CPU3: update cpu_capacity 1535
[ 0.007180] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007821] CPU4: failed to boot: -22
[ 0.008474] CPU5: failed to boot: -22
[ 0.009114] CPU6: failed to boot: -22
[ 0.009759] CPU7: failed to boot: -22
[ 0.009862] smp: Brought up 1 node, 4 CPUs
[ 0.009902] SMP: Total of 4 processors activated (80.00 BogoMIPS).
[ 0.009909] CPU: All CPU(s) started in SVC mode.
[ 0.010947] devtmpfs: initialized
[ 0.020908] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.021294] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.021413] pinctrl core: initialized pinctrl subsystem
[ 0.021555] Detected Renesas R-Car Gen2 r8a7790 ES2.0
[ 0.022113] NET: Registered protocol family 16
[ 0.022268] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.023319] No ATAGs?
[ 0.023347] hw-breakpoint: Failed to enable monitor mode on CPU 0.
[ 0.023452] IRQ2 is asserted, installing da9063/da9210 regulator quirk
[ 0.026158] renesas_irqc e61c0000.interrupt-controller: driving 4 irqs
[ 0.031124] sh-pfc e6060000.pfc: r8a77900_pfc support registered
[ 0.046992] vgaarb: loaded
[ 0.047236] SCSI subsystem initialized
[ 0.047396] libata version 3.00 loaded.
[ 0.047608] usbcore: registered new interface driver usbfs
[ 0.047654] usbcore: registered new interface driver hub
[ 0.047748] usbcore: registered new device driver usb
[ 0.048985] i2c-sh_mobile e6520000.i2c: I2C adapter 6, bus speed 100000 Hz
[ 0.049409] i2c 7-0058: clearing da9063/da9210 interrupts
[ 0.050571] i2c 7-0058: IRQ2 is not asserted, removing quirk
[ 0.050723] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 100000 Hz
[ 0.050943] media: Linux media interface: v0.10
[ 0.050992] Linux video capture interface: v2.00
[ 0.051327] sh_cmt ffca0000.timer: ch0: used for clock events
[ 0.051340] sh_cmt ffca0000.timer: ch1: used as clock source
[ 0.051350] clocksource: ffca0000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000000 ns
[ 0.051967] Advanced Linux Sound Architecture Driver Initialized.
[ 0.052498] sh_cmt ffca0000.timer: PM domain always-on will not be powered off
[ 0.052647] clocksource: Switched to clocksource arch_sys_counter
[ 0.060980] NET: Registered protocol family 2
[ 0.061408] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.061459] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.061554] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.061593] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.061617] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.061773] NET: Registered protocol family 1
[ 0.062083] RPC: Registered named UNIX socket transport module.
[ 0.062091] RPC: Registered udp transport module.
[ 0.062097] RPC: Registered tcp transport module.
[ 0.062103] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.062113] PCI: CLS 0 bytes, default 64
[ 0.063855] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.064400] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.064833] NFS: Registering the id_resolver key type
[ 0.064852] Key type id_resolver registered
[ 0.064858] Key type id_legacy registered
[ 0.064871] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.064878] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.066514] bounce: pool size: 64 pages
[ 0.066565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.066574] io scheduler noop registered
[ 0.066581] io scheduler deadline registered
[ 0.066605] io scheduler cfq registered (default)
[ 0.068824] gpio_rcar e6050000.gpio: driving 32 GPIOs
[ 0.069980] gpio_rcar e6051000.gpio: driving 30 GPIOs
[ 0.071105] gpio_rcar e6052000.gpio: driving 30 GPIOs
[ 0.072275] gpio_rcar e6053000.gpio: driving 32 GPIOs
[ 0.073639] gpio_rcar e6054000.gpio: driving 32 GPIOs
[ 0.074888] gpio_rcar e6055000.gpio: driving 32 GPIOs
[ 0.075645] pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
[ 0.075811] pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
[ 0.075822] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
[ 0.075830] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.075860] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
[ 0.075881] pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
[ 0.075893] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.076105] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.076128] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.076199] pci 0000:00:01.0: supports D1 D2
[ 0.076206] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.076408] pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.076429] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.076499] pci 0000:00:02.0: supports D1 D2
[ 0.076506] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.076716] PCI: bus0: Fast back to back transfers disabled
[ 0.076726] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.076808] pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
[ 0.076819] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
[ 0.076853] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.076887] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.077124] pci-rcar-gen2 ee0b0000.pci: PCI: bus0 revision 11
[ 0.077274] pci-rcar-gen2 ee0b0000.pci: PCI host bridge to bus 0001:01
[ 0.077283] pci_bus 0001:01: root bus resource [mem 0xee0a0000-0xee0a10ff]
[ 0.077290] pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.077312] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
[ 0.077329] pci 0001:01:00.0: reg 0x10: [mem 0xee0b0800-0xee0b0bff]
[ 0.077340] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.077527] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.077548] pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.077619] pci 0001:01:01.0: supports D1 D2
[ 0.077626] pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.077813] pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.077834] pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.077904] pci 0001:01:02.0: supports D1 D2
[ 0.077911] pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.078104] PCI: bus1: Fast back to back transfers disabled
[ 0.078114] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.078237] pci 0001:01:01.0: BAR 0: assigned [mem 0xee0a0000-0xee0a0fff]
[ 0.078248] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0a1000-0xee0a10ff]
[ 0.078275] pci 0001:01:01.0: enabling device (0140 -> 0142)
[ 0.078308] pci 0001:01:02.0: enabling device (0140 -> 0142)
[ 0.078477] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
[ 0.078622] pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0002:02
[ 0.078631] pci_bus 0002:02: root bus resource [mem 0xee0c0000-0xee0c10ff]
[ 0.078638] pci_bus 0002:02: No busn resource found for root bus, will use [bus 02-ff]
[ 0.078663] pci 0002:02:00.0: [1033:0000] type 00 class 0x060000
[ 0.078678] pci 0002:02:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
[ 0.078690] pci 0002:02:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.078881] pci 0002:02:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.078902] pci 0002:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.078972] pci 0002:02:01.0: supports D1 D2
[ 0.078978] pci 0002:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.079173] pci 0002:02:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.079193] pci 0002:02:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.079262] pci 0002:02:02.0: supports D1 D2
[ 0.079269] pci 0002:02:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.079471] PCI: bus2: Fast back to back transfers disabled
[ 0.079481] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.079656] pci 0002:02:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
[ 0.079667] pci 0002:02:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
[ 0.079695] pci 0002:02:01.0: enabling device (0140 -> 0142)
[ 0.079727] pci 0002:02:02.0: enabling device (0140 -> 0142)
[ 0.092965] DA9210: Bringing 1080000uV into 1000000-1000000uV
[ 0.098723] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.099871] SuperH (H)SCI(F) driver initialized
[ 0.100366] e6c50000.serial: ttySC1 at MMIO 0xe6c50000 (irq = 101, base_baud = 0) is a scifa
[ 0.100911] e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 102, base_baud = 0) is a scif
[ 3.482696] console [ttySC0] enabled
[ 3.493958] [drm] Initialized
[ 3.503877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.523706] [drm] No driver support for vblank timestamp query.
[ 3.556296] da9063 7-0058: Device detected (chip-ID: 0x61, var-ID: 0x30)
[ 3.577553] random: fast init done
[ 3.600513] scsi host0: sata_rcar
[ 3.610655] ata1: SATA max UDMA/133 irq 104
[ 3.623963] renesas_spi e6b10000.spi: DMA available
[ 3.639383] m25p80 spi0.0: s25fl512s (65536 Kbytes)
[ 3.654025] 3 ofpart partitions found on MTD device spi0.0
[ 3.670461] Creating 3 MTD partitions on "spi0.0":
[ 3.684815] 0x000000000000-0x000000040000 : "loader"
[ 3.700560] 0x000000040000-0x000000440000 : "user"
[ 3.715716] 0x000000440000-0x000004000000 : "flash"
[ 3.731160] renesas_spi e6b10000.spi: probed
[ 3.744765] spi_sh_msiof e6e10000.spi: DMA available
[ 3.760371] libphy: Fixed MDIO Bus: probed
[ 3.773227] CAN device driver interface
[ 3.785603] libphy: sh_mii: probed
[ 3.796869] sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:3d:c1, IRQ 103.
[ 3.824030] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.843594] ehci-pci: EHCI PCI platform driver
[ 3.857041] ehci-pci 0000:00:02.0: EHCI Host Controller
[ 3.872714] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 3.894983] ehci-pci 0000:00:02.0: irq 119, io mem 0xee081000
[ 3.932663] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
[ 3.950594] hub 1-0:1.0: USB hub found
[ 3.961857] hub 1-0:1.0: 1 port detected
[ 3.974024] ehci-pci 0001:01:02.0: EHCI Host Controller
[ 3.989696] ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
[ 4.011946] ehci-pci 0001:01:02.0: irq 120, io mem 0xee0a1000
[ 4.052660] ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
[ 4.070506] hub 2-0:1.0: USB hub found
[ 4.072658] ata1: link resume succeeded after 1 retries
[ 4.097462] hub 2-0:1.0: 1 port detected
[ 4.109632] ehci-pci 0002:02:02.0: EHCI Host Controller
[ 4.125307] ehci-pci 0002:02:02.0: new USB bus registered, assigned bus number 3
[ 4.147562] ehci-pci 0002:02:02.0: irq 121, io mem 0xee0c1000
[ 4.182679] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.192660] ehci-pci 0002:02:02.0: USB 2.0 started, EHCI 1.00
[ 4.193318] hub 3-0:1.0: USB hub found
[ 4.193352] hub 3-0:1.0: 1 port detected
[ 4.193725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.193728] ohci-pci: OHCI PCI platform driver
[ 4.193802] ohci-pci 0000:00:01.0: OHCI PCI host controller
[ 4.193818] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 4
[ 4.193854] ohci-pci 0000:00:01.0: irq 119, io mem 0xee080000
[ 4.303292] hub 4-0:1.0: USB hub found
[ 4.303328] hub 4-0:1.0: 1 port detected
[ 4.303698] ohci-pci 0001:01:01.0: OHCI PCI host controller
[ 4.303714] ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 5
[ 4.303746] ohci-pci 0001:01:01.0: irq 120, io mem 0xee0a0000
[ 4.423307] hub 5-0:1.0: USB hub found
[ 4.434575] hub 5-0:1.0: 1 port detected
[ 4.446716] ohci-pci 0002:02:01.0: OHCI PCI host controller
[ 4.463435] ohci-pci 0002:02:01.0: new USB bus registered, assigned bus number 6
[ 4.485641] ohci-pci 0002:02:01.0: irq 121, io mem 0xee0c0000
[ 4.603310] hub 6-0:1.0: USB hub found
[ 4.614574] hub 6-0:1.0: 1 port detected
[ 4.627016] sh-pfc e6060000.pfc: pin GP_5_19 already requested by ee090000.pci; cannot claim for e6590000.usb
[ 4.656747] sh-pfc e6060000.pfc: pin-179 (e6590000.usb) status -22
[ 4.675270] sh-pfc e6060000.pfc: could not request pin 179 (GP_5_19) from group usb0_ovc_vbus on device sh-pfc
[ 4.705509] renesas_usbhs e6590000.usb: Error applying setting, reverse things back
[ 4.728463] renesas_usbhs: probe of e6590000.usb failed with error -22
[ 4.748213] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 4.774965] mousedev: PS/2 mouse device common for all mice
[ 4.807203] da9063-rtc da9063-rtc: rtc core: registered da9063-rtc as rtc0
[ 4.832886] i2c /dev entries driver
[ 4.845085] i2c-sh_mobile e6500000.i2c: I2C adapter 4, bus speed 100000 Hz
[ 4.866879] i2c-sh_mobile e6510000.i2c: I2C adapter 5, bus speed 100000 Hz
[ 4.888037] adv7180 6-0020: chip found @ 0x20 (e6520000.i2c)
[ 4.923755] Error: Driver 'adv7511' is already registered, aborting...
[ 4.944050] rcar_jpu fe980000.jpeg-codec: encoder device registered as /dev/video0
[ 4.966740] rcar_jpu fe980000.jpeg-codec: decoder device registered as /dev/video1
[ 5.007350] rcar-vin e6ef1000.video: Device registered as video30
[ 5.028178] rcar_thermal e61f0000.thermal: 1 sensor probed
[ 5.051027] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[ 5.066132] sh_mobile_sdhi ee140000.sd: Got CD GPIO
[ 5.132675] sh_mmcif ee220000.mmc: Chip version 0x0003, clock rate 12MHz
[ 5.153500] usbcore: registered new interface driver usbhid
[ 5.170199] usbhid: USB HID core driver
[ 5.188615] rcar_sound ec500000.sound: probed
[ 5.202023] NET: Registered protocol family 10
[ 5.215964] Segment Routing with IPv6
[ 5.226980] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.245268] NET: Registered protocol family 17
[ 5.258590] can: controller area network core (rev 20120528 abi 9)
[ 5.277151] NET: Registered protocol family 29
[ 5.290464] can: raw protocol (rev 20120528)
[ 5.303254] can: broadcast manager protocol (rev 20161123 t)
[ 5.320214] can: netlink gateway (rev 20130117) max_hops=1
[ 5.336724] Key type dns_resolver registered
[ 5.349590] Registering SWP/SWPB emulation handler
[ 5.366540] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.386392] [drm] No driver support for vblank timestamp query.
[ 5.430297] Console: switching to colour frame buffer device 128x48
[ 5.455604] rcar-du feb00000.display: fb0: frame buffer device
[ 5.473707] [drm] Device feb00000.display probed
[ 5.488123] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[ 5.712820] sh_mobile_sdhi ee100000.sd: mmc1 base at 0xee100000 max clock rate 195 MHz
[ 5.737070] sh_mobile_sdhi ee140000.sd: Got CD GPIO
[ 5.765532] mmc0: new high speed MMC card at address 0001
[ 5.782086] mmcblk0: mmc0:0001 MMC08G 7.33 GiB
[ 5.795829] mmcblk0boot0: mmc0:0001 MMC08G partition 1 2.00 MiB
[ 5.813732] mmcblk0boot1: mmc0:0001 MMC08G partition 2 2.00 MiB
[ 5.833254] mmcblk0: p1 p2
[ 5.952823] sh_mobile_sdhi ee140000.sd: mmc2 base at 0xee140000 max clock rate 97 MHz
[ 5.977919] asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
[ 6.000882] input: keyboard as /devices/platform/keyboard/input/input0
[ 6.022391] da9063-rtc da9063-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 6.144888] Micrel KSZ8041RNLI ee700000.etherne:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.etherne:01, irq=340)
[ 6.182767] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.106325] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 8.112664] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.142704] Sending DHCP requests ..., OK
[ 15.922652] IP-Config: Got DHCP answer from 192.168.1.225, my address is 192.168.1.235
[ 15.946392] IP-Config: Complete:
[ 15.956063] device=eth0, hwaddr=2e:09:0a:00:3d:c1, ipaddr=192.168.1.235, mask=255.255.255.0, gw=192.168.1.225
[ 15.987080] host=192.168.1.235, domain=, nis-domain=(none)
[ 16.004826] bootserver=192.168.1.225, rootserver=192.168.1.225, rootpath= nameserver0=192.168.1.225, nameserver1=192.168.1.235, nameserver2=8.8.8.8
[ 16.047080] SDHI0 Vcc: disabling
[ 16.056755] SDHI2 Vcc: disabling
[ 16.066420] SDHI0 VccQ: disabling
[ 16.076345] SDHI2 VccQ: disabling
[ 16.086270] ALSA device list:
[ 16.095156] #0: rsnd-dai.0-ak4642-hifi
[ 16.111481] VFS: Mounted root (nfs filesystem) on device 0:13.
[ 16.129413] devtmpfs: mounted
[ 16.138973] Freeing unused kernel memory: 1024K
[ 16.536388] init: ureadahead main process (1008) terminated with status 5
[ 17.863149] udevd[1075]: starting version 175
[ 18.179657] random: crng init done
[ 19.131824] init: failsafe main process (1812) killed by TERM signal
[ 19.730661] init: plymouth main process (1010) killed by ABRT signal
[ 19.805892] init: plymouth-splash main process (1835) terminated with status 2
[ OK ]ting sensors limits
[ 20.481184] init: alsa-restore main process (1906) terminated with status 99
Last login: Sat Jan 1 0[ 20.633635] init: plymouth-stop pre-start process (1946) terminated with status 1
0:00:15 UTC 2000 on tty1
[ 20.678026] init: tty1 main process (1947) killed by TERM signal
Welcome to Linaro 13.04 (GNU/Linux 4.10.0-rc2-dirty armv7l)
* Documentation: https://wiki.linaro.org/
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~# uname -a
Linux linaro-naro 4.10.0-rc2-dirty #275 SMP Thu Jan 19 13:29:13 JST 2017 armv7l armv7l armv7l GNU/Linux
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~# fbset -depth 16 -rgba 5,6,5,0
ioctl FBIOPUT_VSCREENINFO: Invalid argument
root@linaro-naro:~#
root@linaro-naro:~#
root@linaro-naro:~#
