Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
.../devicetree/bindings/timer/renesas,ostm.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/renesas,ostm.txt
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
new file mode 100644
index 0000000..46e1f27
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
@@ -0,0 +1,36 @@
+* Renesas OS Timer (OSTM)
+
+The OSTM comes with 2 independent channels.
+We will use the first channel (OSTM0) as a free running clocksource and the
+second channel (OSTM1) as a interrupt driven clock event.
+
+Additionally we will use the clocksource channel (OTSM0) for the system
+schedule timer sched_clock().
+
+Required Properties:
+
+ - compatible: must be one or more of the following:
+ - "renesas,ostm-r7s72100" for the r7s72100 OSTM
+ - "renesas,ostm" for any OSTM
+ This is a fallback for the above renesas,ostm-* entries
+
+ - reg: base address and length of the registers block for each timer channel.
+ There should be 2 sets of addresses, one for each channel.
+
+ - interrupts: interrupt specifiers for the timers. There should be 2
+ interupts, one for each channel.
+
+ - clocks: a list of phandle + clock-specifier pairs, one for each entry
+ channel. There should be 2 sets, one for each channel.
+
+Example: R7S72100 (RZ/A1H) OSTM node
+
+ ostm: ostm@fcfec000 {
+ compatible = "renesas,ostm-r7s72100", "renesas,ostm";
+ reg = <0xfcfec000 0x30>,
+ <0xfcfec400 0x30>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&mstp5_clks R7S72100_CLK_OSTM0>, <&mstp5_clks R7S72100_CLK_OSTM1>;
+ };
--
2.10.1
