Hi, This series adds support for Wake-on-Lan using Magic Packet for a few models of the sh_eth driver. Patch 1/6 fix a naming error, patch 2/6 adds generic support to control and support WoL while patches 3/6 - 6/6 enable different models. Based ontop of net-next master. Changes since v2. - Fix bookkeeping for "active_count" and "event_count" reported in /sys/kernel/debug/wakeup_sources. Thanks Geert for noticing this. - Add new patch 1/6 which corrects the name of ECMR_MPDE bit, suggested by Sergei. - s/sh7743/sh7734/ in patch 5/6. Thanks Geert for spotting this. - Spelling improvements suggested by Sergei and Geert. - Add Tested-by to 3/6 and 4/6. Changes since v1. - Split generic WoL functionality and device enablement to different patches. - Enable more devices then Gen2 after feedback from Geert and datasheets. - Do not set mdp->irq_enabled = false and remove specific MagicPacket interrupt clearing, instead let sh_eth_error() clear the interrupt as for other EMAC interrupts, thanks Sergei for the suggestion. - Use the original return logic in sh_eth_resume(). - Moved sh_eth_private variable *clk to top of data structure to avoid possible gaps due to alignment restrictions. - Make wol_enabled in sh_eth_private part of the already existing bitfield instead of a bool. - Do not initiate mdp->wol_enabled to 0, the struct is kzalloc'ed so it's already set to 0. Niklas Söderlund (6): sh_eth: use correct name for ECMR_MPDE bit sh_eth: add generic wake-on-lan support via magic packet sh_eth: enable wake-on-lan for R-Car Gen2 devices sh_eth: enable wake-on-lan for r8a7740/armadillo sh_eth: enable wake-on-lan for sh7734 sh_eth: enable wake-on-lan for sh7763 drivers/net/ethernet/renesas/sh_eth.c | 123 +++++++++++++++++++++++++++++++--- drivers/net/ethernet/renesas/sh_eth.h | 5 +- 2 files changed, 117 insertions(+), 11 deletions(-) -- 2.11.0