According to the datasheets, the sh7760 SIM and sh7723 SCIFA instances
don't implement the REIE bit. Don't set it in platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 1 -
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 3 ---
2 files changed, 4 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 6dbcbf1621aa..e51fe1734e13 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -200,7 +200,6 @@ static struct platform_device scif2_device = {
};
static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
/*
* This is actually a SIM card module serial port, based on an SCI with
* additional registers. The sh-sci driver doesn't support the SIM port
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 6c5cb234aa33..1c1b3c469831 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -86,7 +86,6 @@ static struct platform_device scif2_device = {
};
static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
.sampling_rate = 8,
.type = PORT_SCIFA,
};
@@ -107,7 +106,6 @@ static struct platform_device scif3_device = {
};
static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
.sampling_rate = 8,
.type = PORT_SCIFA,
};
@@ -128,7 +126,6 @@ static struct platform_device scif4_device = {
};
static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
.sampling_rate = 8,
.type = PORT_SCIFA,
};
--
Regards,
Laurent Pinchart
