On 12 December 2016 at 20:51, Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> wrote: > Here is a series adding HS200 support to the SDHI driver. Building the actual > functionality on top of SDR104 support was rather easy. However, I figured the > checks for enabling tuning were rather scattered over the driver and could be > further improved. So I did some refactoring of that to make adding HS200 > support then a one-liner :) > > This has been tested on Salvator-X boards with R-Car H3 and M3-W SoCs. It has > also been tested on a Lager board (R-Car H2) checking SDR50/104 for > regressions. The whole test document showing significant speed-ups reading from > the on-board eMMC can be found here: > > http://elinux.org/Tests:eMMC-HS > > and the branch can be found here: > > git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/topic/sdhi-emmc-hs > > Please comment, review, apply... > > Thanks, > > Wolfram > > > Wolfram Sang (9): > mmc: sh_mobile_sdhi: simplify accessing DT data > mmc: sh_mobile_sdhi: improve prerequisite for hw_reset > mmc: sh_mobile_sdhi: improve prerequisites for tuning > mmc: sh_mobile_sdhi: remove superfluous check in hw_reset > mmc: sh_mobile_sdhi: remove superfluous check in init_tuning > mmc: sh_mobile_sdhi: remove superfluous check in SCC error check > mmc: sh_mobile_sdhi: enable HS200 > arm64: dts: r8a7795: enable HS200 for eMMC > arm64: dts: r8a7796: enable HS200 for eMMC > > arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 1 + > arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 1 + > drivers/mmc/host/sh_mobile_sdhi.c | 67 ++++++++-------------- > 3 files changed, 27 insertions(+), 42 deletions(-) > Thanks, applied patch 1 -> 7 for next. DTS changes in patch 8 and 9 are for Simon to pick up. Kind regards Uffe > -- > 2.10.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
