Hi Chris,
CC devicetree
On Wed, Dec 14, 2016 at 3:14 AM, Chris Brandt <Chris.Brandt@xxxxxxxxxxx> wrote:
> Today I realized that the clock control using clk-mstp has never actually worked for RZ/A1 (r7s72100).
Oops... Where did your (offlist) bug report for rspi needing a delay after
clock enable come from?
> The reason is that the MSTP registers are 8-bit instead of the normal 32-bit, and if you do a 32-bit write to them, nothing happens.
> If you look in drivers/clk/renesas/clk-mstp.c, you'll see that clk_readl and clk_writel are used.
I was aware the registers are documented to be 8-bit wide, but I always
assumed 32-bit accesses do work.
> The reason why I have gotten this far is because u-boot has been enabling everything early in boot, so all the clocks were already on.
> Of course if I disable everything again before I booting the kernel....nothing works.
Oops, I only have MSTP early disable debug code for boards I do have
physical access to (cfr. my topic/renesas-debug branch)...
> If I change the accesses in clk-mspt.c to 8-bit, clocks get enabled/disabled as they should.
> #define clk_readl readb
> #define clk_writel writeb
>
>
> So, any suggestions on the best way to fix this???
> Ideally I would like something that can easily be integrated back into 4.9.x
>
>
>
> Maybe add a new DT property named "reg_width":
>
> mstp3_clks: mstp3_clks@fcfe0420 {
> #clock-cells = <1>;
> compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
> reg = <0xfcfe0420 4>;
> reg_width = 8;
> clocks = <&p0_clk>;
> clock-indices = <R7S72100_CLK_MTU2>;
> clock-output-names = "mtu2";
> };
>
> and then in cpg_mstp_clocks_init(), do:
>
> if (of_find_property(np, "reg_width", &i))
> group->reg_width = i;
> else
> group->reg_width = 32; /* default */
>
>
> In cpg_mstp_clock_endisable(), do:
>
> if (group->reg_width == 8)
> writeb(value, group->smstpcr);
> else
> clk_writel(value, group->smstpcr);
That's one option. Note that the standard name for such property seems to be
"reg-io-width".
Another option is to let the driver bind against
"renesas,r7s72100-mstp-clocks", and switch to 8-bit access mode.
CLK_OF_DECLARE(cpg_mstp_clks, "renesas,r7s72100-mstp-clocks",
cpg_mstp_clocks_init8);
cpg_mstp_clocks_init8() can set a gloal flag, and call cpg_mstp_clocks_init().
The latter means no DT update is needed, and thus preserves compatibility
with old DTBs.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
