Hi, This series adds support for Wake-on-Lan using Magic Packet for a few models of the sh_eth driver. Patch 1/5 adds generic support to control and support WoL while patches 2/5 - 5/5 enable different models. Changes since v1. - Spit generic WoL functionality and device enablement to different patches. - Enable more devices then Gen2 after feedback from Geert and datasheets. - Do not set mdp->irq_enabled = false and remove specific MagicPacket interrupt clearing, instead let sh_eth_error() clear the interrupt as for other EMAC interrupts, thanks Sergei for the suggestion. - Use the original return logic in sh_eth_resume(). - Moved sh_eth_private variable *clk to top of data structure to avoid possible gaps due to alignment restrictions. - Make wol_enabled in sh_eth_private part of the already existing bitfield instead of a bool. - Do not initiate mdp->wol_enabled to 0, the struct is kzalloc'ed so it's already set to 0. Niklas Söderlund (5): sh_eth: add generic wake-on-lan support via magic packet sh_eth: enable wake-on-lan for Gen2 devices sh_eth: enable wake-on-lan for r8a7740/armadillo sh_eth: enable wake-on-lan for sh7743 sh_eth: enable wake-on-lan for sh7763 drivers/net/ethernet/renesas/sh_eth.c | 121 +++++++++++++++++++++++++++++++--- drivers/net/ethernet/renesas/sh_eth.h | 3 + 2 files changed, 114 insertions(+), 10 deletions(-) -- 2.10.2
