Use recently added R-Car Gen 2 fallback binding for iii nodes in
DT for r8a7793 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7793 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7793.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index cbe9ac629693..d5114cac656d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -485,7 +485,8 @@
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
@@ -499,7 +500,8 @@
i2c7: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
@@ -513,7 +515,8 @@
i2c8: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
--
2.7.0.rc3.207.g0ac5344
