Use recently added R-Car Gen 1 fallback binding for i2c nodes in DT for r8a7779 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7779 and the fallback binding for R-Car Gen 1. Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx> --- arch/arm/boot/dts/r8a7779.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 55a7c1e37c57..f47a0edc26d4 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -173,7 +173,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; @@ -184,7 +184,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; @@ -195,7 +195,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; @@ -206,7 +206,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; -- 2.7.0.rc3.207.g0ac5344