Hello Magnus and Geert, list,
this patch series enable the creation of a spidev device though which
interface to a MAXREFDES4# MAX11100-ADC evaluation kit connected to Genmai
CON2 expansion header.
The series is not intended for inclusion but will probably serve as base
for future integration of MAX11100 ADC driver.
The series is based on branch "genmai-gpio-and-pfc" of Geert's tree at
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git
and target Linux v3.18
The series fix a compilation error for RZ gpio driver and register a
spidev device on a gpio based SPI master.
The test bed is setup as:
P11_11 (CN2 pin 5) connected as CS
P11_10 (CN2 pin 6) connected as MISO
P11_9 (CN2 pin 7) connected as SCLK
P11_8 (CN2 pin 8) connected as AIN
The ADC input is connected to gpio port 11 pin 8 (gpio863) and ADC
functionalities have been tested reading the results of successive
analog-to-digital conversions and verifying they match the gpio863
output value.
Thanks
j
v1 -> v2:
* use "spidev" as compatible string in v1 [2/3] and drop [3/3]
consequentially.
* incorporate Geert's comments in [2/3] DTS file
Jacopo Mondi (2):
gpio-rz: Port to v3.18
dts: arm: genmai: Add MAXDESREF4x spidev
arch/arm/boot/dts/r7s72100-genmai.dts | 21 +++++++++++++++++++++
drivers/gpio/gpio-rz.c | 3 ++-
2 files changed, 23 insertions(+), 1 deletion(-)
--
2.7.4
