Pins not associated with a GPIO port can still have other configuration parameters. Add a new macro SH_PFC_PIN_NAMED_CFG which allows for named pins to be declared with a set of configurations. The new macro is an modification of SH_PFC_PIN_NAMED to allow for optional configuration to be assigned. The flag SH_PFC_PIN_CFG_NO_GPIO is still enforced as this should only be used to define pins not associated with a GPIO port. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- drivers/pinctrl/sh-pfc/sh_pfc.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h index 9556c17..e42cc7a 100644 --- a/drivers/pinctrl/sh-pfc/sh_pfc.h +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h @@ -546,6 +546,14 @@ extern const struct sh_pfc_soc_info shx3_pinmux_info; .configs = SH_PFC_PIN_CFG_NO_GPIO, \ } +/* SH_PFC_PIN_NAMED_CFG - Expand to a sh_pfc_pin entry with the given name */ +#define SH_PFC_PIN_NAMED_CFG(row, col, _name, cfgs) \ + { \ + .pin = PIN_NUMBER(row, col), \ + .name = __stringify(PIN_##_name), \ + .configs = SH_PFC_PIN_CFG_NO_GPIO | cfgs, \ + } + /* PINMUX_DATA_ALL - Expand to a list of PORT_name_DATA, PORT_name_FN0, * PORT_name_OUT, PORT_name_IN marks */ -- 2.10.2