LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple incompatible data link layers have been used over time to transmit image data to LVDS panels. This binding supports display panels compatible with the JEIDA-59-1999, Open-LDI and VESA SWPG specifications. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> --- .../bindings/display/panel/panel-lvds.txt | 119 +++++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/panel-lvds.txt diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt new file mode 100644 index 000000000000..250861f2673e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt @@ -0,0 +1,119 @@ +Generic LVDS Panel +================== + +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple +incompatible data link layers have been used over time to transmit image data +to LVDS panels. This bindings supports display panels compatible with the +following specifications. + +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February +1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National +Semiconductor +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video +Electronics Standards Association (VESA) + +Device compatible with those specifications have been marketed under the +FPD-Link and FlatLink brands. + + +Required properties: +- compatible: shall contain "panel-lvds" +- width-mm: panel display width in millimeters +- height-mm: panel display height in millimeters +- data-mapping: the color signals mapping order, "jeida-18", "jeida-24" + or "vesa-24" + +Optional properties: +- label: a symbolic name for the panel +- avdd-supply: reference to the regulator that powers the panel analog supply +- dvdd-supply: reference to the regulator that powers the panel digital supply +- data-mirror: if set, reverse the bit order on all data lanes (6 to 0 instead + of 0 to 6) + +Required nodes: +- One "panel-timing" node containing video timings, in accordance with the + display timing bindings defined in + Documentation/devicetree/bindings/display/display-timing.txt. +- One "port" child node for the LVDS input port, in accordance with the + video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + +LVDS data mappings are defined as follows. + +- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and + [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. + +Slot 0 1 2 3 4 5 6 + ________________ _________________ +Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ +DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< +DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< +DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + +- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] + specifications. Data are transferred as follows on 4 LVDS lanes. + +Slot 0 1 2 3 4 5 6 + ________________ _________________ +Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ +DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< +DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< +DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< +DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< + +- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. + Data are transferred as follows on 4 LVDS lanes. + +Slot 0 1 2 3 4 5 6 + ________________ _________________ +Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ +DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< +DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< +DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< +DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< + + +Control signals are mapped as follows. + +CTL0: HSync +CTL1: VSync +CTL2: Data Enable +CTL3: 0 + + +Example +------- + +panel { + compatible = "mitsubishi,aa121td01", "panel-lvds"; + label = "lcd"; + + width-mm = <261>; + height-mm = <163>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1280x800 @60Hz */ + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hsync-len = <70>; + hfront-porch = <20>; + hback-porch = <70>; + vsync-len = <5>; + vfront-porch = <3>; + vback-porch = <15>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; +}; -- Regards, Laurent Pinchart