Re: [PATCH 2/3] ARM: dts: gose: add HDMI input

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

On Fri, Sep 30, 2016 at 2:40 PM, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>> --- a/arch/arm/boot/dts/r8a7793-gose.dts
>> +++ b/arch/arm/boot/dts/r8a7793-gose.dts
>> @@ -374,6 +374,11 @@
>>               groups = "audio_clk_a";
>>               function = "audio_clk";
>>       };
>> +
>> +     vin0_pins: vin0 {
>> +             groups = "vin0_data24", "vin0_sync", "vin0_clkenb",
> "vin0_clk";
>> +             function = "vin0";
>> +     };
>>  };
>>
>>  &ether {
>> @@ -531,6 +536,21 @@
>>               };
>>       };
>>
>> +     hdmi-in@4c {
>> +             compatible = "adi,adv7612";
>> +             reg = <0x4c>;
>> +             interrupt-parent = <&gpio1>;
>> +             interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
>
> Isn't the interrupt signal connected to GP4_2 ?

No idea about Gose, but on Koelsch it is (hence koelsch DTS is wrong??)

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds