Hi Wolfram,
On 09/20/2016 05:57 AM, Wolfram Sang wrote:
> The core uses it for polling. Give drivers a proper define handle this
> case like for other response types.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
> include/linux/mmc/core.h | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
> index b01e77de1a74de..4caee099b63a28 100644
> --- a/include/linux/mmc/core.h
> +++ b/include/linux/mmc/core.h
> @@ -55,6 +55,9 @@ struct mmc_command {
> #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
> #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
>
> +/* Can be used by core to poll after switch to MMC HS mode */
> +#define MMC_RSP_R1_NO_CRC (MMC_RSP_PRESENT|MMC_RSP_OPCODE)
MMC_RSP_RQ_NO_CRC is described at Specification?
Best Regards,
Jaehoon Chung
> +
> #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
>
> /*
>
