Em Mon, 19 Sep 2016 20:59:56 +0300
Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> escreveu:
> Hi Mauro,
>
> On Monday 19 Sep 2016 14:55:43 Mauro Carvalho Chehab wrote:
> > Em Wed, 14 Sep 2016 02:16:59 +0300 Laurent Pinchart escreveu:
> > > Cropping on the WPF sink pad restricts the left and top coordinates to
> > > 0-255. The same result can be obtained by cropping on the RPF without
> > > any such restriction, this feature isn't useful. Disable it.
> > >
> > > Signed-off-by: Laurent Pinchart
> > > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > ---
> > >
> > > drivers/media/platform/vsp1/vsp1_rwpf.c | 37
> > > +++++++++++++++++---------------- drivers/media/platform/vsp1/vsp1_wpf.c
> > > | 18 +++++++---------
> > > 2 files changed, 26 insertions(+), 29 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.c
> > > b/drivers/media/platform/vsp1/vsp1_rwpf.c index
> > > 8cb87e96b78b..a3ace8df7f4d 100644
> > > --- a/drivers/media/platform/vsp1/vsp1_rwpf.c
> > > +++ b/drivers/media/platform/vsp1/vsp1_rwpf.c
> > > @@ -66,7 +66,6 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev
> > > *subdev,>
> > > struct vsp1_rwpf *rwpf = to_rwpf(subdev);
> > > struct v4l2_subdev_pad_config *config;
> > > struct v4l2_mbus_framefmt *format;
> > >
> > > - struct v4l2_rect *crop;
> > >
> > > int ret = 0;
> > >
> > > mutex_lock(&rwpf->entity.lock);
> > >
> > > @@ -103,12 +102,16 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev
> > > *subdev,>
> > > fmt->format = *format;
> > >
> > > - /* Update the sink crop rectangle. */
> > > - crop = vsp1_rwpf_get_crop(rwpf, config);
> > > - crop->left = 0;
> > > - crop->top = 0;
> > > - crop->width = fmt->format.width;
> > > - crop->height = fmt->format.height;
> > > + if (rwpf->entity.type == VSP1_ENTITY_RPF) {
> > > + struct v4l2_rect *crop;
> > > +
> > > + /* Update the sink crop rectangle. */
> > > + crop = vsp1_rwpf_get_crop(rwpf, config);
> > > + crop->left = 0;
> > > + crop->top = 0;
> > > + crop->width = fmt->format.width;
> > > + crop->height = fmt->format.height;
> > > + }
> > >
> > > /* Propagate the format to the source pad. */
> > > format = vsp1_entity_get_pad_format(&rwpf->entity, config,
> > >
> > > @@ -129,8 +132,10 @@ static int vsp1_rwpf_get_selection(struct v4l2_subdev
> > > *subdev,>
> > > struct v4l2_mbus_framefmt *format;
> > > int ret = 0;
> > >
> > > - /* Cropping is implemented on the sink pad. */
> > > - if (sel->pad != RWPF_PAD_SINK)
> > > + /* Cropping is only supported on the RPF and is implemented on the
> sink
> > > + * pad.
> > > + */
> >
> > Please read CodingStyle and run checkpatch before sending stuff upstream.
> >
> > This violates the CodingStyle: it should be, instead:
> > /*
> > * foo
> > * bar
> > */
>
> But it's consistent with the coding style of this driver. I'm OK fixing it,
> but it should be done globally in that case.
There are inconsistencies inside the driver too on multi-line
comments even without fixing the ones introduced on this series,
as, on several places, multi-line comments are correct:
drivers/media/platform/vsp1/vsp1_bru.c:/*
drivers/media/platform/vsp1/vsp1_bru.c- * The BRU can't perform format conversion, all sink and source formats must be
drivers/media/platform/vsp1/vsp1_bru.c- * identical. We pick the format on the first sink pad (pad 0) and propagate it
drivers/media/platform/vsp1/vsp1_bru.c- * to all other pads.
drivers/media/platform/vsp1/vsp1_bru.c- */
drivers/media/platform/vsp1/vsp1_dl.c:/*
drivers/media/platform/vsp1/vsp1_dl.c- * Initialize a display list body object and allocate DMA memory for the body
drivers/media/platform/vsp1/vsp1_dl.c- * data. The display list body object is expected to have been initialized to
drivers/media/platform/vsp1/vsp1_dl.c- * 0 when allocated.
drivers/media/platform/vsp1/vsp1_dl.c- */
...
I'll address the ones only the CodingStyle violation introduced by this
series. I'll leave for the vsp1 maintainers/developers.
Btw, there are several kernel-doc tags that use just:
/*
...
*/
instead of:
/**
...
*/
I suggest you to add the files/headers with kernel-doc markups on
a Documentation/media/v4l-drivers/vsp1.rst file, to be created.
This way, you can validate that such documentation is correct,
and produce an auto-generated documentation for this driver.
Regards,
Mauro
