The text states that default-input is an endpoint property, but in the
example it is a device property. The example makes more sense.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
---
Documentation/devicetree/bindings/media/i2c/adv7604.txt | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 8337f75..9cbd92e 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -34,6 +34,7 @@ The digital output port node must contain at least one endpoint.
Optional Properties:
- reset-gpios: Reference to the GPIO connected to the device's reset pin.
+ - default-input: Select which input is selected after reset.
Optional Endpoint Properties:
@@ -47,8 +48,6 @@ Optional Endpoint Properties:
If none of hsync-active, vsync-active and pclk-sample is specified the
endpoint will use embedded BT.656 synchronization.
- - default-input: Select which input is selected after reset.
-
Example:
hdmi_receiver@4c {
--
2.9.3
